System Date / Time Setting; Set Date / Time - Speco DVR-4TL/160 User Manual

3.4

System Date / Time Setting

User can set the current date, time and other OSD parameters in Date/Time
menu. The administrator's privileges are required for entering the submenu.
In OSD Main menu, select <System Setup> and press ENTER, then select
<Date/Time> to access the Date/Time menu; the menu displays as follows.
1. Date
2. Time
3. Date/Time Display
4. Date Display Mode
5. Time Display Mode
6. Date/Time Order
7. Daylight Saving Time
8. DST Start
9. DST End
10. DST Bias
3.4.1

Set Date / Time

Set Date / Time
Select <Date> / <Time> and press ENTER for adjusting the settings. LEFT /
RIGHT keys are used to move the cursor to previous or next field, ENTER is
for selecting, and UP / DOWN are used to change the value in the selected
field.
Date / Time Display
Users are allowed to choose to set the date / time OSD displays in 1 or 2
rows. Use the UP / DOWN keys to change the setting. The default is to
display the date / time OSD in one row.
Date/Time
NOTE: The reset date / time setting applies to record new video, the
date and time of previously recorded video will not be changed.
NOTE: To avoid record database corruption, after changing the date
/ time setting, it is recommended to clear the database.
2005/02/21
PM10:39:26
1 Row
24 HR
Date First
Apr, 1 st Sun, 02:00
Apr, Last Sun, 02:00
60 Min
17
User's Manual
Y/M/D
OFF