Speco DVR-16 User Manual page 13

11. NEW PASSWORD
: XXXX (Default password : 0000)
To set the new password.
12. CLEAR HDD
Delete all the contents of your HDD. When you choose "YES"on this option, you will be prompted with the
question shown : Press "► "to clear HDD or press "◄ "to confirm not to clear HDD.
13. SYSTEM RESET
Reset all system settings to book to factory default settings.
14. REMOTE MODE
Set the remote mode for connection with computer via RS-232 or RS-485. (Please refer to page.18 for RS-232
Remote Protocol)
15. BAUD RATE
Set the remote protocol transmitting baud rate. Available Baud Rate are 115200, 57600, 19200, 9600, 4800,
3600, 2400 and 1200.
16. REMOTE PROTOCOL ID SETUP
To control different DMR by setting RS232 remote protocol. ID number can be set from 000 to 255.
SEARCH
Press "ENTER" to confirm SEARCH setup, and the screen will show following options.
1. LAST RECORD
Play the last recorded piece of video.
2. FULL LIST
Show a listing of all recorded video on the HDD which sorted by time.
D : Motion Record
M : Manual Record time
A : Alarm Record time
T : Timer Record time
M-HDD : Storage in Master HDD
S-HDD : Storage in Slave HDD
3. ALARM LIST
Show a listing of all recorded video triggered by an Alarm.
NOTE : If there are no Alarm in the record, the screen will
display " EMPTY" .
4. MOTION LIST
Show a listing of all motion detection triggered.
5. TIME SEARCH
Find video recorded on a specific date that is entered.
► M 2002-JAN-01 01:02:03 M-HDD
M 2002-JAN-01 01:02:03 M-HDD
A 2002-JAN-01 01:02:03 M-HDD
T 2002-JAN-01 01:02:03 M-HDD
D 2002-JAN-01 01:02:03 S-HDD
M 2002-JAN-01 01:02:03 S-HDD
◄ : PAGE UP► : PAGE DOWN
► LAST RECORD
12
ALL DATA IN HDD
WILL BE CLEARED
ARE YOU SURE?
(◄ : NO ► : YES )
(MENU)
► SEARCH
TIMER
RECORD
CAMERA
SYSTEM
EVENT
FULL LIST
ALARM LIST
MOTION LIST
TIME SEARCH