imilab EC5 - Floodlight Outdoor Security IP Camera Manual

Product Introduction

Please read this manual carefully before using the device and retain it for future reference.

• Package list
  

• Product Appearance
  

Installing the Device

The device can be wall mounted, ceiling mounted or tied around a support.

Wall mounting

1. Attach the wall mounting positioning sticker on the desired installation location on a wall. Drill two holes at the positions indicated on the sticker. Drilling diameter of around 6.0 mm; drilling depth of around 30mm.
   
2. Insert two plastic expansion nuts into the wall. Put the base plate on the wall. Secure the base plate by inserting the screws into the expansion nuts.
   

Ceiling mounting

1. Attach the ceiling mounting positioning sticker on the desired installation location on the ceiling. Drill two holes at the positions indicated on the sticker. Drilling diameter of around 6.0 mm; drilling depth of around 30mm.
   
2. Insert two plastic expansion nuts into the wall. Put the base plate on the ceiling. Secure the base plate by inserting the screws into the expansion nuts.
   

Pole mounting

Connecting the Device

• Turn on the camera
  Insert the power supply cable into the camera's power supply port. Connect the other end of the power supply cable to a power source.
• Insert a micro SD card.
  Ensure that the camera is disconnected from the power supply. Use a screwdriver to remove the protective case and expose the micro SD card slot. The contact points of the micro SD card should be facing down. Insert the micro SD card into the slot.

Note:
When inserting or removing the micro SD card, please disconnect the camera from the power supply. Please use a micro SD card from a reputable manufacturer (up to 256GB). The recommended read and write speed of the micro SD card is at least U1/Class 10.

• Restoring factory settings
  Press and hold the reset button to restore the factory settings. The content inside the micro SD card will not be deleted.

Connecting to Mi Home App

This product works with Mi Home and can be controlled using the Mi Home app.
Scan the QR code to download and install the Mi Home app. If you already have Mi Home app installed, you will be directed to the device connection page. You can also search for "Mi Home" in an app store to download and install the Mi Home app. Open the Mi Home app. Tap "+" at the top right corner and following the on-screen instructions to add the device.

64295C5D
Note: Actual operation may differ due to Mi Home app update. Please follow the on-screen instructions of the Mi Home app.

About works with mijia

"works with mijia" signifies that the product herein is designed to connect and interact with Mi Home app or Mi AI. Please be noted that the product herein is certified by the app interaction only. Xiaomi and Mijia are not responsible for anyof the product manufacturing, safety and regulatory standards, or quality supervision.

Specifications

Name: IMILAB EC5 Floodlight Camera
Model: CMSXJ55A
Input: 12V 1A
Resolution: 2304 x 1296
Operating Temperature:-30℃ ~ 60℃
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz
Dimensions: 139 x 128 x 135 mm
Net Weight: 630 g
Viewing Angle: 95°
Aperture: F2.1
IP rating: IP66
FCC ID: 2APA9-CMSXJ55A

Full Color Night Vision

The light sensor can automatically switch the device to night vision mode through IR-CUT based on changes in the lighting of the environment. Built-in high power exposure light can present colorful images even in the darkness.

Night vision effect illustration

Video Playback

Past videos can only be viewed when a compatible micro SD card is inserted in IMILAB EC5 Floodlight Camera. After inserting a micro SD card and turning on the device, the camera will automatically start recording.
In the control interface for IMILAB EC5 Floodlight Camera in the Mi Home app, tap the playback button to enter the video playback page. You can also view a recording by selected a time period.

Sharing a Video

In the control interface for IMILAB EC5 Floodlight Camera in the Mi Home app, you can set the device as a shared device in the settings menu and invite others to watch the recordings. Users must download the Mi Home app and login to their Xiaomi account in order to view the recordings of the shared device.

Note:
The illustrations are for reference only. The pages may differ based on actual Mi Home app version and mobile phone operating system.

Home Security

The Home Security function can be turned on/off in the control interface for IMILAB EC5 Floodlight Camera in the Mi Home app.
The device can detect and record movements within the viewing angle and push the recording to the client. Users can set the surveillance time, alert sensitivity, alert interval, etc.

Note:
The illustrations are for reference only. The pages may differ based on actual Mi Home app version and mobile phone operating system.

Precautions

• The working temperature of the device is -30℃ to 60℃. Do not use the device when the temperature is too high or too low.
• For better results, avoid placing the camera in front of or next to a glass surface, a white-colored wall or other reflective surfaces as this may cause the recording to have un-even lighting between the foreground and background or be over-exposed.
• Please ensure that the device is within Wi-Fi signal coverage.
• Place it at a location with good Wi-Fi signal strength.
• Try to avoid placing the device near a metallic object, a microwave oven or other objects that may cause signal interference.