Part Iv: Maintaining The Wood Chipper - All-Power APWC420 User Manual

PART IV: Maintaining the Wood Chipper

Regular maintenance is the way to ensure the best performance and long life of your
machine. Please refer to this manual and the engine manufacturer's user manual for
maintenance procedures.
WARNING
Before performing any maintenance procedure or inspection, stop the engine, wait five
minutes to allow all parts to cool. Disconnect the spark plug wire, keeping it away from the
spark plug. Disconnect the Battery Terminals (Electric start only).
Regular Maintenance Checklist
Procedure
Check engine oil level
Check general equipment
condition
Check belts
Check tire pressure
Clean engine exterior and
cooling
Change Engine Oil
Replace air filter
Replace spark plug
Engine Service
Refer to the engine manufacturer's user manual for engine maintenance.
Lubrication
NOTICE
All Bearings of your Chipper are sealed units and should have sufficient lubricant to last the
life of your machine with normal use.
Part IV: Maintaining The Wood Chipper
Before Each Use
Δ
Δ
Δ
First time
5hours
21
Every 3 Every 25
Hours Hours
Δ
Δ
Δ
Δ
Every 100
Hours
Δ