Steps
1. Locate the WLAN card slot on your computer.
2. Slide the WLAN card into the slot on the system board.
3. Reconnect the WLAN card cables to the WLAN module.
4. Place the WLAN bracket on the WLAN card and secure it with the single (M2x3) screw.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
WWAN card
Removing the WWAN
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
32
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.