Table of Contents
Advertisement
REGISTERING A NEW HANDSET
On the rear of the main base station (not the charger pod) you will find the REG button
needed for step 1.
To register the handset:
1.
Press and hold the REG button on the rear of the main base of the DECT312 until the
SBR LED is on permanently (will take approx. 10 seconds) Now release the button.
You have 5 minutes to complete the following steps on your new additional handset
2.
Press right menu key
3.
Press up /down
4.
Press right menu key
5.
While Register HS is displayed, press right menu key
the PIN code "0000" (default). , press right menu key
is displayed as the handset searches for the base. (If you enter the PIN incorrectly
"RETRY?" will be displayed. Press digit 1 on the key pad and re-enter 0000)
6.
After 5 to 10 seconds, the new handset number will appear in the upper right corner
of the LCD display. Registration is complete.
7.
If ? is displayed, it means registration was not successful. Repeat steps 1-6.
8.
To register the other handsets, follow steps 1 to 6.
Important Note: The Base unit of the 209 is GAP compatible, therefore you can register any
GAP compatible handset to the base and use on the system BUT you will not be able to use
all the features available to the other handsets. You will be able to make and receive external
calls and receive internal calls but you will not be able to make internal calls or transfer calls
DELETE A HANDSET
1. Press right menu key
2. Press up /down
3. Press right menu key
4. Press right menu key
5. Delete HS 101 is displayed.
6. Press up /down
delete (for example, 101 to 109)
7. Press right menu key
8. Press end key
LINE SELECT FUNCTION
1. To select line 1, press * 1, (LCD display Line 1) then call key and enter the
phone number.
2. To select line 2, press * 2, (LCD display Line 2) then call key and enter the
phone number.
to enter the menu
key to select HS Setting.
to confirm. Register HS is displayed.
to enter the menu.
key to select Base Setting.
to confirm. Delete HS will be displayed.
to confirm.
key to select the extension handset number you would like to
to confirm. Delete HS is displayed again.
to exit.
13
to confirm. Then enter
to confirm. Please Wait
Advertisement
Table of Contents
