Advertisement
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Charger
Generation
Serial no.
1.5 Declaration of conformity
The manufacturer declares, on his sole responsibility, that the product
described here complies with the applicable legislation and standards. A
copy of the declaration of conformity can be found at the end of this
documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-
86916 Kaufering, Germany
2
Safety
2.1 General safety instructions
WARNING Study all safety instructions and other instructions, im-
ages and technical data with which this power tool is provided. Failure
to observe the instructions below can result in electric shock, fire and/or se-
rious injury.
Keep all safety instructions and instructions for future reference.
▶ Persons (including children) with reduced physical, sensory or mental
abilities or lack of experience and knowledge are not permitted to use
this product.
▶ Do not allow children to play with the product.
▶ If you mount the charger on a wall, make sure that the charger is securely
fixed to the wall.
▶ Install the charger in such a way that a battery inserted into it cannot fall
out.
2.2 Battery charger use and care
▶ To avoid injury, use the charger only to charge Hilti Li-ion batteries
approved for use with this charger.
▶ The location at which the charger is used should be clean, cool, dry and
protected from frost.
▶ The charger must be able to emit heat while in operation. The air vents
must therefore remain unobstructed. Do not operate the charger inside
a closed container.
*2388749*
C 422
01
2388749
English
3
Advertisement
