Related Manuals for PERRARO POLAR TRIKE
Summary of Contents for PERRARO POLAR TRIKE
- Page 1 Perraro E-Trike Owner's Manual www.perraroelectricbike.com 949-414-8003 info@perraroelectricbike.com...
- Page 2 --------------------------------------- 15 Inflating and suspension --------------------------------------- 28 Troubleshooting ----------------------------------------- 29 Safety Notes ----------------------------------------- 30 Driving Range ----------------------------------------- 31 Recommended Torque --------------------------------------- 32 Daily check --------------------------------------- 33 PERRARO POLAR ASSEMBLY VIDEO Scan QR Code or visit the link below www.perraroelectricbike.com/products/ perraro-polar-electric-trike-750w...
- Page 3 Saddle with suspension seat post Rear Cargo Bag i-ion Ba 24" x 4.0" Front Wheel Foldable Front Motor 20" x 4.0" Rear Wheel Rear Derailleur...
- Page 4 1. Unpack the trike. We recommend enlisting the help of a friend for the assembly. Please retain the box in case you decide to return the electric trike 2. These are the tools and accessories included in the toolbox. 3. Begin unfolding the electric trike as shown in the picture...
- Page 5 UNFOLDING THE POLAR ETRIKE 1. Use two people to prevent scratching the frame. 2. Have one person lift the trike from the bottom frame while another person unfolds it. 3. Fit the frame together and secure the clamp.
- Page 6 HANDLEBAR INSTALLMENT Remove the nut on top and slide it up the stem of the handlebars. Slide the handlebar into the stem. Make sure the handlebar is centered. Push the nut back down and tighten it securely. Gently push the plastic cap as shown in the picture...
- Page 7 FRONT WHEEL INSTALLMENT 1. Remove the nut and washers from both sides of the wheel 2. Put the anti-rotation washer on both sides of the wheel with the protruding side towards the wheel 3. Position the front wheel so that the brake rotor is on the correct side 4.
- Page 8 MOTOR CABLE & HANDLEBAR INSTALLMENT 1. Insert the black cord into the connector located on the right fork. Make sure it is properly connected and fully inserted. 2. Secure the cable by zipping it as demonstrated in the provided picture. 3.
- Page 9 FRONT FENDER AND HEAD LIGHT INSTALLMENT 1. Use the existing bolt and nut to attach the front light and fender. Remove the nut using the correct Allen wrench and with proper triangle wrench. 2. Remove the bolt, line up the light and fender, then replace the bolt and tighten the nut securely. 3.
- Page 10 Assembly instructions FRONT BASKET INSTALLMENT - - - ;, ..-- - ,. - � &- • � 1. Remove the screws from the basket housing. 2. Install the front basket and securely fasten the screwsTighten the four bolts to the chrome pieces under the handlebars. 3.
- Page 11 CRANK ARM INSTALLMENT 1. Take the right crank arm and securely slide it onto the spindle, placing it 180 degrees in the reverse direction compared to the other arm as shown in picture 1, and tighten the bolt securely. 2. Carefully place the chain and thread it onto the right-side chaining of the crank ar 3.
- Page 12 SADDLE & TAIL LIGHT INSTALLMENT 1. Insert the post into the saddle tube at the desired position. 1. Locate the Rear Signal Lights: Identify the rear signal lights 2. Tighten the screw and secure the lever to keep the saddle in installed backward.
- Page 13 REAR FENDER INSTALLMENT 1. Begin by attaching the fenders to the basket as depicted in the picture. Ensure that the longer side of the fender connection is oriented toward the rear, while the shorter connection of the fender faces the front of the electric trike. 2.
- Page 14 REAR BASKET INSTALLMENT 1. Attach the rear rack to the trike, making certain that the holes align with the frame. 2. Secure the rack onto the trike by bolting it and tightening the nuts beneath it.
- Page 15 Assembling pedal instructions GROCERY BAG INSTALLMENT 1. Begin by installing the supporting rigid plastic PP hardboard for all six sides, following the illustration provided. 2. Gently place the plastic frame into the basket. 3. Insert the cool grocery bag into the basket."...
- Page 16 Please inflate the tire with the following instruction Step 1: Find the tire safety line. Step 2: Tilt the whole to the left until the tire is off the ground and adjust the safety line to fit the edge of the rim evenly. Step 3: Inflate tire 50% only and check again if tire fits in the rim.
- Page 17 DISPLAY USER MANUAL Power display speed mode Assist gear Power TRIP, ODO, WH/KM RCG / motor temperature/CLK Up key M key Down key...
- Page 18 DISPLAY USER MANUAL 1.3 ON/OFF 6KM / H cruising, ON/OFF 1.6 Parameters setting Specific operation explanations Headlight, Reset ODO to start setting When e-bike stops, long press parameters, such as Long press to enter 6KM / H cruising mode. Stop wheel size(inch), background luminance...
- Page 19 DISPLAY USER MANUAL Ø TEMP/ RCG/ CLK switching Ø Switch function: Press “M” again can enter the TEMP/RCG/CLK switching Press and hold the M button for mode,which display: motor temperature, regean Ah, clock about 2 seconds to turn it on and off. 4 .
- Page 20 DISPLAY USER MANUAL Display setting interface Item Description Setting the metric and imperial effects speed display and System does not affect the "wheel" settings in Basic setting menu. Brightness Backlight brightness setting Auto off Automatic sleep time, off is not automatic sleep Main interface, battery display mode, voltage mode and Battery battery compartment...
- Page 21 Advance setting interface Item Description PAS mode speed split: There are 3, 5 and 9 modes; please assist level select 5 mode speed limit the controller use the computer or app settings instead of current limit the LCD settings. power limit Enter the number of magnetic steel sheets.
- Page 22 DISPLAY USER MANUAL Charging tips -The battery pack should be recharged after each use. There is no memory effect so you can charge the battery after short periods of use without damage. - The battery can be recharged on or off the bike. Remove the battery by turning the key and than pulling forwards and upwards carefully until the pack lifts off.
- Page 23 When the battery is charging on the bike 1. Switch off the power. The battery can be charged on or off the bike. 2. Plug the output lead of the charger into the socket of the battery case. 3. Plug the AC power input plug into the 110/220 volt household power socket to start charging. 4.
-
Page 24: While Driving
Important tips while driving 1-ln order to reduce consumption, increase autonomy, and extend the motors lifespan, use the pedals during the startups and climbs. 2-Do not twist the throttle too fast. The vehicle should accelerated slowlv, reducing consumption and risk of damage to the electrical system. - Page 25 Symptoms Possible causes Most common solutions (l)lnsufficient battery power (l)Charge the battery It doesn't work (2)Faulty connections {2)Clean the connections {3)Key in wrong position {3)Turn the key into the correct position (!)Insufficient battery power {l)Charge the battery Irregular acceleration and/or (2)loose throttle magneto (2)Weld and adjust reduced top speed...
- Page 26 To ensure safe riding conditions you must properly maintain your bike. You should follow the basic guidelines below and see your certified local shop seasonally to ensure your bike is safe for using. bike Regular self-checks !.Tightening and correct operation of both wheels, frame and front fork. 2.Tire pressure and conditions.
-
Page 27: Gear Display
To ensure safety make the following functional checks before driving: Normal operation of the light, brake and power cut system. 2 - Tire pressure (low pressure, will influence both autonomy and speed). 3 - Wheel axle tightening. Battery charging level. Braking system adjustment and free operation. - Page 28 NEED ASSISTANCE ? PLEASE CALL / TEXT 949-414-8003 or e-mail info@perraroelectricbike.com Register your bike at www.perraroelectricbike.com Address : 2229 S Wright St. Santa Ana CA 92705...