Table of Contents
Advertisement
en PRF IU template project
Care instructions for stainless steel
surfaces
When taking care of and cleaning
stainless steel surfaces, use only
cleaning cloths and cleaning agents
suitable for stainless steel.
Tips
¡ To prevent visible scratches, wipe
the stainless steel surface in the
direction of the grain.
¡ Suitable cleaning agents and
cleaning cloths are available from
our customer service, your dealer
or on our website.
Preparing the appliance for cleaning
"Switch off the appliance."
1.
→ Page 15
Disconnect the appliance from the
2.
power supply.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
Take out all of the food and store it
3.
in a cool place.
Place ice packs (if available) onto
the food.
If there is a layer of hoarfrost, allow
4.
this to defrost.
"Remove all fittings and accessor-
5.
ies from the appliance."
→ Page 18
Cleaning the appliance
WARNING
Risk of electric shock!
¡ An ingress of moisture can cause
an electric shock.
Do not use steam- or high-pres-
▶
sure cleaners to clean the appli-
ance.
¡ Liquid in the lighting or in the con-
trols can be dangerous.
The rinsing water must not drip
▶
into the lighting or controls.
18
ATTENTION!
¡ Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
Do not use hard scouring pads
▶
or cleaning sponges.
Do not use harsh or abrasive
▶
detergents.
Do not use cleaning products
▶
with a high alcohol content.
Do not use stainless-steel clean-
▶
ing agents on the outside of the
appliance.
¡ If you clean fittings and accessor-
ies in the dishwasher, this may
cause them to become deformed
or discolour.
Never clean fittings and access-
▶
ory in the dishwasher.
"Prepare the appliance for clean-
1.
ing." → Page 18
Clean the appliance, the fittings,
2.
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings.
4.
Electrically connect the appliance.
5.
"Switch on the appliance."
6.
→ Page 14
Putting the food into the appliance.
7.
Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the frozen food container
Take out the frozen food container
1.
as far as it will go.
Lift the frozen food container at the
2.
front
and remove it
→ Fig.
4
.
Advertisement
Table of Contents
