Changing A Washing Program - AEG OKO-LAVAMAT 74730 User Information

Instructions for use
With automatic program adaptation by the controller of the washing
3
machine (quantity of washing, type of washing, imbalance recognition,
special rinse etc.), it is possible to stop or correct the counting of the
remaining run time.

Changing a Washing Program

Changing or aborting a program
0 1. Press button START/PAUSE (START/PAUZE, MARCHE/PAUSE).
2. Turn programme knob to OFF (UIT, ARRET). The washing program is
aborted.
3. If required, set a new washing program. Otherwise turn the programme
knob to PUMP OUT (POMPEN, VIDANGE) and then press the button
START/PAUSE (START/PAUZE, MARCHE/PAUSE).
The washing program can be interrupted at any time with the button
3
START/PAUSE (START/PAUZE, MARCHE/PAUSE) and continued by press-
ing the button again. Changing the washing program is possible only
after the programme knob was turned to OFF (UIT, ARRET).
Select the Additional Program
The additional programs QUICK WASH (KORT, COURT) or STAIN
(VLEKKEN, TACHES) can also be selected after the program start.
0 1. Press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE).
2. Press the button QUICK WASH (KORT, COURT) or the button STAIN
(VLEKKEN, TACHES).
3. Press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) again.
The washing program is continued.
Change the Spin Speed
During the washing program, the spin speed can still be changed or
RINSE HOLD (GEEN. CENTR., SANS ESSOR.) can be set.
0 1. Press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE).
2. Change the speed with the button Spin/RINSE HOLD (GEEN CENTR.,
SANS ESSOR.).
3. Press the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) again.
The washing program is continued.
24