Advertisement
Door Handles
The door handles may be packed inside the fridge.
To fit the door handle
Bracket
Front of
door
Handle
Bracket
Shelves
The wire shelves sit on shelf clips. The shelf clips twist onto the shelf support strips in the cabinet interior. The shelves may be
positioned at different heights to suit various product. Use the numbers on the shelf support strips to help with setting the shelf clips
at the same height.
BME and SKB fridges are fitted with solid bottom shelves, which must remain in place at all times.
To fit a shelf clip:
Twist anticlockwise onto the shelf support strip.
To adjust the shelf clip height:
Pull the centre tab up and slide up or down as
required. Once in position, ensure it clicks into
place.
Loading Product
Let the fridge run for 30 minutes before loading it with product for the first time. When loading the shelves with product
MAX
46kg
per shelf
Max. Loading
Shelf Flexing
Do not overload the
Remove product if the
shelves.
shelf is flexing.
Fridge
1.
A metal spring is fitted inside the
handle mounts. Ensure the springs
point up.
Spring clip
(pointing up)
2. Place BOTH handle mounts
simultaneously onto both door
brackets. Then push the handle
down onto the brackets until the
handle locks in place.
3.
If the handle doesn't lock into place,
check that the spring clips are
pointing up and try again. If only one
end of the handle locks into place,
remove the door handle and refit
with both handle mounts placed
onto the brackets.
Shelf Overhang
Do not let product
overhang the shelves.
To remove the door handle
Handle
Handle mount
Bracket
Catch
Bracket
Catch
To remove a shelf clip:
Pull the centre tab up and twist off clockwise.
Refrigeration
Refrigeration
1.
Peel back the door gasket from
behind the handle mounts on the
inside of the door frame.
2. Unscrew the handle mounts through
the holes on the inside of the door
frame, and remove the handle.
Only unscrew the top and bottom
screws. Do NOT unscrew the middle
screw.
3.
Remove the bracket/s from the
handle mount by pressing the
bracket in and down until it unclips
from the handle mount.
4. Fit and screw the bracket/s back
onto the door. Ensure the catches
are pointing up as pictured.
5.
Clip the gasket back into place on
the inside of the door frame.
If the gasket is out of shape, use a
hair drier to heat and reshape it.
:
Advertisement
