Advertisement
Installation Guidelines
When installing this fridge, ensure the installation guidelines below are considered and met
Ventilation
Surface
Ensure all ventilation
The installation surface
must be capable of
requirements below
supporting the loaded
are met.
cabinet.
Uneven Surface
Sunlight
Do not install the
Do not install the fridge
fridge in direct
on an uneven surface.
sunlight.
Ventilation Requirements
This fridge must have the following ventilation clearances at all times.
TME and SKT models
300 mm
Min.
above
No side
clearance
required
No below clearance required
Fridge
Door Opening
Allow adequate space
for the door/s to open
and close properly.
Power Supply
Do not overload the
power supply.
BME and SKB models
No side
No behind
clearance
clearance
required
required
Climate Class
The fridge must be
installed in an
environment within its
climate class.
The climate class is
stated on the cabinet
rating label inside the
fridge, and explained on
the front page of this
user guide.
Blocking Ventilation
Do not store boxes or
items in front or on top
of the fridge.
50 mm
Min.
above
50 mm
Min.
behind (provided
by rear spacer)
50 mm
Min.
below
Refrigeration
Refrigeration
.
BME and SKB Rear Spacer
Extend the two rear spacers
out, ensuring they are
locked into place.
Advertisement
