Checking The Engine-Oil Level; Adjusting The Handle Height - Toro Recycler 21447 Operator's Manual

22in lawn mower
Table of Contents

Advertisement

Checking the Engine-Oil Level

Service Interval: Before each use or daily
Important:
If the oil level in the crankcase is too low or too high and you run the engine, you may
damage the engine.

Adjusting the Handle Height

You can raise or lower the handle in 1 of 2 positions that is more comfortable for you.
1.
Loosen both handle knobs until you can push the square edges of the carriage bolts out of the square
holes in the handle brackets.
2.
Push the knobs until they are loose.
3.
Move the handle to the upper or lower height position.
4.
Pull the knobs until the square edges of each carriage bolt fits into its related square hole.
5.
Tighten the handle knobs as tight as you can.
Figure 9
Figure 10
10
g235721
g361819

Advertisement

Table of Contents
loading

Table of Contents