Download Print this page

Workhorse ATV 1502 Assembly / Operation Instructions / Parts

Deluxe atv 2 nozzle sprayer

Advertisement

Quick Links

MODEL # ATV 1502 and ATV 2502
DELUXE ATV 2 NOZZLE SPRAYER
• Polyethylene Tank
• 2 Nozzle Boom Assembly
• 12 Volt Diaphragm Pump
• 2.2 G.P.M.
• Quick Attach Mounting System
— GENERAL INFORMATION
The purpose of this manual is to assist you in assembling, operating
and maintaining your lawn and garden sprayer.
Please read it carefully as it furnishes information which will help you
achieve years of dependable trouble-free operation.
— ASSEMBLY INSTRUCTIONS
Tools required:
2 — 7/16" End Wrenches
1 — 9/16" End Wrench
1 — Thread Sealant
1 — Blade Screwdriver
1 — 3/16" Allen Wrench
WARNING: Some chemicals will damage the pump valves if allowed to soak untreated for a long period of time.
Always flush the pump with water after use. Do not allow chemicals to sit in pump for extended times of idleness.
Follow chemical manufacturers instructions on disposal of all waste water from the sprayer.
PRECISION SPRAY EQUIPMENT, a divison of Green Leaf, Inc. 9490 N BALDWIN ST FONTANET, IN 47851 www.grnleafinc.com 800-654-9808
WORKHORSE
WORKHORSE
Assembly / Operation Instructions / Parts
S
• 80 inch coverage with Check Valve and Filter
• Lever Handgun
• 15 Ft. of 3/8" Hose (Handgun)
• Pressure Gauge
• Adjustable Pressure Range (0-60 PSI Max.)
— WARRANTY / PARTS / SERVICE
Workhorse products are warranted for one year from the date of
purchase against manufacture or workmanship defects for personal
or homeowner usage with proof of purchase. Workhorse products
are warranted for 90 days for commercial users. Any unauthorized
modification of a Workhorse brand sprayer will void warranty.
Your authorized dealer is the best source of replacement parts and
service. To obtain prompt, efficient service, always remember to
give the following information: 1) Correct part description and part
number.
2) Model number and serial number of your sprayer.
Part description and part numbers can be obtained from the
illustrated parts list section of this manual.
Whenever you need parts or repair service, contact your distributor
/ dealer first. For warranty work always take your original sales slip,
or other evidence of purchase date, to your distributor / dealer.
P
R
A
Y
by PSE®, a Division of Green Leaf, Inc®
by PSE®, a Division of Green Leaf, Inc®
ATV 1502
ATV 2502
PSE
P R E C I S I O N S P R AY E Q U I P M E N T
®
E
R
S
®
a division of Green Leaf, Inc
®

Advertisement

loading

Summary of Contents for Workhorse ATV 1502

  • Page 1 — GENERAL INFORMATION — WARRANTY / PARTS / SERVICE Workhorse products are warranted for one year from the date of The purpose of this manual is to assist you in assembling, operating purchase against manufacture or workmanship defects for personal and maintaining your lawn and garden sprayer.
  • Page 2: Operation

    — OPERATION — AFTER SPRAYING After use, fill the sprayer part way with water. Start the sprayer and allow The pumping system draws solution from the tank, through the clear water to be pumped through the plumbing system and out strainer and to the pump.
  • Page 3: General Assembly

    — GENERAL ASSEMBLY Instruction #1 Assembly Instructions PARTS LIST 1.0--Install ATV Boom Mounts & ATV Helix Levers ITEM PART NUMBER DESCRIPTION in two places on bottom of tank as illustrated 600132 25 Gallon Tank using 5/16" Flat Head Screws. Note the the orientation of all parts as their orientation 600133 Tank Lid...
  • Page 5 — Pump & Valve Assembly Boom Hose Assembly Wand Hose Assembly PARTS LIST ITEM PART NUMBER DESCRIPTION 640451 2.2 GPM Pump 630201 4.0 GPM Pump 630031 5.0 GPM Pump 600289 Manifold Body Install Wand Hose Assembly onto 600291 Elbow (2.2 pumps) Swivel Barb Assembly, by placing a Hose Clamp over the open end of the 600292...
  • Page 6: Specifications

    PowerFLO 7800 Series ™ 12 Volt DC Motor-Driven Diaphragm Pumps Model: 7802: 2.2 GPM Pressure Sensing Demand Switch — The PowerFLO Series 7800 pump is controlled by a built-in pressure Specifications — sensing demand switch. When a faucet or valve is opened down stream of Motor: the pump, line pressure drops thus starting the pump automatically.
  • Page 7: Troubleshooting Guide

    Troubleshooting Guide — 06/18 Problem/Causes and Remedies: Pump will not Shut Off (Output line closed and no leaks) Pump will not Start Check: Check: • Air trapped in outlet line or pump head • Correct voltage (±10%) and electrical connections •...

This manual is also suitable for:

Atv 2502