Toshiba RAV-GM301ATP-NZ Service Manual page 78

No. Part name
Inverter
3
assembly
※ Warning 1)
As each connector has a lock mechanism,
avoid to remove the connector by holding the
lead wire, but by holding the connector.
Procedure
Connector
Connection to compressor (3P：Relay
connector white）
※ (Warning 1)
Reactor (2P：Relay connector white)
CN31･･･ Outdoor fan (3P：white)
※ (Warning 1)
CN72･･･ 4 directional valve (3P：yellow)
※ (Warning 1)
CN73･･･ PMV coil (6P：white)
※ (Warning 1)
CN62･･･ TD sensor (3P：white)
CN64･･･ TS sensor (3P：white)
※ (Warning 1)
CN61･･･ TE sensor (2P：white)
※ (Warning 1)
CN63･･･ TO sensor (2P：white)
CN52･･･High pressure switch (2P : white)
※ (Warning 1)
Please remove housing part's lock before
removing connectors.
REQUIREMENT
Inverter
assembly
– 78 –
Remarks
Remove the connectors
with locking function by
pushing the part
indicated by the arrow
mark.