Dismantling The External Panels - Biasi BASICA COND 28S User Manual And Installation Instructions

possible to modify the value of parameter
A50:
00 = Maintenance period not activated
01 = Maintenance period activated
• Press 10 or 11 (Fig. 10.1) to confirm the
value entered and return to the list of pa-
rameters (Fig. 10.3).
• Press the 15 button (Fig. 10.1) to exit "pro-
gramming mode".
10.3 Dismantling the external
panels
Front panel
• Unscrew screws "A" and remove the front
panel "E" by pulling it and pushing it to-
wards the top so that it is freed from the
top housings (Fig. 10.4 and Fig. 10.5).
Side panels
Loosen screws "B - G" and "C - I" in Fig.
10.4 and remove the two side panels "F"
and "H" by pulling towards the outside.
B
Fig. 10.4
MAINTENANCE
A
C
D
H
G
Fig. 10.5
Control panel
Remove screws "D" (Fig. 10.4) and turn the
controls panel "J", as shown in figure Fig.
10.6, to access in an optimal manner the
components inside the boiler.
J
Fig. 10.6
F
I
E
- 63 -