Asko W6098P User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

USER MANUAL

W6098P

W6098P/1

Washing machine

WM75.2

Carefully read the instructions for use before using the washing machine.

Table of Contents

Need help?

Do you have a question about the W6098P and is the answer not in the manual?

Questions and answers

Summary of Contents for Asko W6098P

Page 1 USER MANUAL W6098P W6098P/1 Washing machine WM75.2 Carefully read the instructions for use before using the washing machine.
Page 2: Table Of Contents
Dear Customer, We thank you for purchasing this quality ASKO product. We hope it meets all your expectations. Scandinavian design combines pure lines, everyday functionality, and high quality. These are the key characteristics of all our products, and the reason why they are highly appreciated across the globe.
Page 3: Safety Precautions
Keep the instruction manual handy, near the washing machine. • Instructions for use are available on our website at www.asko.com. • Your washing machine is intended solely for household use.
Page 4 • Bleaches that contain chlorine can be replaced with oxygen-based bleaches. Otherwise, a neutralization cycle should be performed by running the Cotton program at the highest temperature. For best results, use hydrogen peroxide or oxygen-based detergents. • Do not use colourants (dyes) or bleaching substances (substances for discolouration or removal of colourants) as they contain sulphuric compounds that could cause corrosion.
Page 5 appliance. Make sure the children do not clean the washing machine or perform any maintenance tasks without supervision. DANGER OF HOT SURFACE • At higher washing temperatures, the door glass will heat up. Be careful to avoid burns. Make sure children do not play near the door glass. WATER OVERFLOW PROTECTION •...
Page 6: Washing Machine Description
WASHING MACHINE DESCRIPTION Main switch (ON/OFF) Program selector knob Display unit Program settings buttons Button (start/pause) Detergent compartment QR and AUID code (on the inside of the washing machine door) Rating plate with information about the washing machine (on the inside of the washing machine door) Washing machine door 10.
Page 7: Before Using The Appliance For The First Time
BEFORE USING THE APPLIANCE FOR THE FIRST TIME PACKAGING Remove all packaging. Please sort the materials in compliance with local recommendations (see chapter ”DISPOSAL”). TRANSPORT PROTECTION Before using the appliance, remove the three transport bolts and plastic plugs which protect the appliance during transport.
Page 8 CLEANING Disconnect the washing machine from the power mains and open the door. Clean the washing machine drum with a damp cloth and a mild detergent. Connect the washing machine to the power mains and run the dedicated drum cleaning program. See chapter "WASHING PROCESS;...
Page 9 The amount of detergent also depends on the hardness of water. For details, see the detergent packaging. Please contact your local water supply company to check the water hardness in your area. Before the product is dispatched from the factory, every appliance is tested. As a result, there may be some residual water left in the discharge pump ﬁ...
Page 10: Installation And Connection
If the appliance is installed on a plinth or a similar structure, then the appliance must be ﬁ xed to it, to avoid the risk of falling. ASKO original accessories are available for this purpose, complete with ﬁ xing instructions. Clearances around the washing machine min.
Page 11 Stacking an ASKO dryer on top of an ASKO concept or closet installation washing machine To stack an ASKO dryer on top of a washing ASKO's front panel controls make it possible to machine, use the extra vacuum feet and the tipping install the washers and dryers in a cabinet or closet.
Page 12 ADJUSTING THE FEET MOVING THE WASHING MACHINE AND TRANSPORT AFTER INSTALLATION Place the washing machine so that it is stable. 1. Level the washing machine in longitudinal and If you are moving the washing machine without traverse direction by rotating the adjustable feet packaging, open the washing machine door and pull (using a No.
Page 13 CONNECTING TO WATER SUPPLY CONNECTING TO HOT/COLD WATER SUPPLY The machine has to be connected to water (Only available in some models) supply by an adequately trained person. If your appliance has connections for both hot and cold water, then connect one hose to the cold Use the water supply hose to connect the appliance.
Page 14 INSTALLING THE DRAIN HOSE Upon delivery, the appliance has a drain hose attached. This drain hose must be connected to a drain. Drain hose can also be attached to a wall drain with a trap; such trap should be properly installed to allow cleaning.
Page 15 CONNECTING TO THE POWER MAINS After installation, the washing machine should stand still for two hours before it is connected to the power mains. Connect the appliance to an earthed power outlet. After installation, the wall outlet should be freely accessible.
Page 16 ASKO LAUNDRY CARE - HIDDEN HELPERS* Laundry care ironing board The ironing board is a clever solution. It is always handy when you need to iron your clothes, and it can be easily, safely and invisibly stored away when not in use.
Page 17 Laundry care plinth Thanks to the stainless steel plinth, your appliance will be raised by 30 cm, which makes loading and unloading of laundry easier. *AVAILABILITY DEPENDING ON MARKET DENOMINATION ART. No. IRONING BOARD HI1153 White 576552 IRONING BOARD HI1153 Stainless steel 732756 IRONING BOARD HI1153 Titanium 576553...
Page 18: Tips Before Washing
TIPS BEFORE WASHING LAUNDRY SYMBOLS This chapter includes several tips on how to prepare the laundry for washing. Observe the laundry symbols. Textile maintenance symbols: LAUNDRY SORTING Washing Sort the laundry according to: • how soiled it is, Normal Delicate •...
Page 19 DYED COTTON ECONOMY AND EFFICIENCY Laundry made of dyed cotton which is to be washed You can save a lot of energy by not using the at 60 °C should be ﬁ rst washed at a temperature of programs operating at higher temperatures. 60 °C to remove the excess dye.
Page 20: Washing Process, Step By Step (1 - 8)
WASHING PROCESS, STEP BY STEP (1 – 8) STEP 1: SORT THE LAUNDRY See chapter "TIPS BEFORE WASHING" Use a washing net for underwire bras. Empty the pockets. Coins, nails etc. could damage the machine and the fabric. STEP 2: TURN ON THE MAIN SWITCH.
Page 21 STEP 4: ADD THE DETERGENT AND THE CONDITIONER. Recommended amount of detergent is usually speciﬁ ed on the detergent packaging. When washing a smaller amount of laundry, the amount of detergent used can be decreased. Observe manufacturers' recommendations regarding the type of detergent suitable for certain temperatures, load size, and water hardness.
Page 22 STEP 5: CHOOSE THE PROGRAM. Choose the program by rotating Program selector knob in either direction. Conﬁ rm the program selection by pressing the button under the program. Choose the program depending on the type of laundry and how heavily soiled it is (see chapter "TIPS BEFORE WASHING").
Page 23 Program Description TIME PROGRAM Use this program when you wish to wash the laundry for a specific amount of time. Duration can be set from 20 minutes to 3 hours (in 15-minute steps). In this program, select the corresponding washing time and temperature according to the type of laundry being washed.
Page 24 Program Description STAIN PROGRAM Choose the fabric and stain type from the menu, and the right stain removal program will be automatically selected. You can choose between the following types of stains: red wine, blood, grass, blueberries, butter/grease, chocolate, coffee/tea, egg, dairy products, kids, baby.
Page 25 Program Description SETTINGS Use the program selector knob to choose Settings and confirm with button "6". Use the Program selector knob to scroll through the settings. The following options are available: – Child Lock, – Language (language selection), – Temperature (temperature unit), –...
Page 26 STEP 6: CHOOSING THE PROGRAM SETTINGS Using the program settings, the washing programs can be further adjusted to your wishes. Some program settings may not be available for your selected program. Selected program settings will remain stored after the end of the washing cycle and may be changed subsequently (except for Start delay and Anti-crease, which are not stored after the wash is complete).
Page 27 3. Temperature The following temperatures are available for the selected program: Cold wash and 20/30/40/50/60/70/80/90 °C. The actual available temperature options will depend on the selected program. 4. Spin speed The following spinning rates are available for the selected program: max. (rpm) /... / No drain (max rpm = depends on the model).
Page 28 Selecting extra functions (Options/more options) Press the button to conﬁ rm the extra settings. Then, use the Program selector knob to scroll the list of functions or options. Conﬁ rm your selection by pressing the button under the selected function or option. The following extra functions are available: Favourite programs/Add to fav? To store the selected program as a favourite, press the...
Page 29 STEP 7: START THE WASH Close the washing machine door and press the Start /Pause button. Start (short press of the button – start/resume) Pause (short press of the button – pause) Stop (press and hold for 3 seconds – stop or cancel) Washing process (circle) is coloured: °C blue: beginning of the washing cycle...
Page 30 The door may be opened when the water is pumped from the machine (but not completely pumped out). Then, add or remove the laundry. Close the door and continue the program. Press the Start /Pause button. The program will resume from the point at which it was interrupted. If the door cannot be opened, it is °C possible that the temperature in the...
Page 31 STEP 8: END OF PROGRAM After the end of the washing program, °C the display will indicate that the program 00:00 has been successfully completed ("Wash ﬁ nished"). °C 00:00 °C If you have selected the Anti-Crease extra function, gentle tumbling will continue after the end of the washing program in order to prevent creasing.
Page 32: Settings
SETTINGS In the Main menu, use the Program °C selector knob to select Settings. Conﬁ rm the selection by pressing the button under the desired setting. Then, use the Program selector knob to scroll the list of the following settings that you can adjust: °C / °F •...
Page 33 LANGUAGE You can choose between 24 languages. Press the button. Use the Program selector knob to scroll the list of languages. Conﬁ rm selection with button under chosen language. Use the button to return to Settings. °C / °F TEMPERATURE (TEMPERATURE UNIT) Choose either °C or °F.
Page 34 How to use the test strip: 1. Turn on the water tap and let the water run for a minute or so. 2. Fill a glass with cold water. 3. Remove the test strip from its packaging. 4. Dip the test strip in the water for about one second. 5.
Page 35 DISPLAY UNIT Set the brightness and logo display. ASKO Use the program selector knob or buttons to choose the brightness. Conﬁ rm your selection with the button under the logo display on/oﬀ option. ASKO ON = display the logo at turning washing...
Page 36: Special Features
SPECIAL FEATURES DOSE ASSIST 1. Display in the Main menu (see chapter "SYSTEM SETTINGS") 2. Choosing the DOSE ASSIST in the Main menu. °C °C °C °C °C Press the button under icon Dosing the recommended amnount of detergent, if Dose Assist is selected .
Page 37: Cleaning And Maintenance
CLEANING AND MAINTENANCE CLEANING THE FILTER The washing machine has a ﬁ lter that will retain smaller objects such as coins, buttons, hair etc. Before cleaning, drain the water from the washing machine using the Drain program, and disconnect the washing machine from the power mains. Open the pump ﬁ...
Page 38 CLEANING THE DETERGENT COMPARTMENT AND DOOR RUBBER GASKET Press the tab to completely remove the detergent compartment from its housing. Rinse and thoroughly clean the tray. You may also remove the cap from the plug in the conditioner compartment (A). Clean any residue from the cap and tube.
Page 39 CLEANING THE APPLIANCE EXTERIOR Clean the appliance exterior and the display unit using a soft damp cotton cloth and water. Do not use solvents or abrasive cleaners that could damage the appliance (please observe the recommendations and warnings provided by the manufacturers of the cleaning agents). Do not clean the washing machine with a jet of water! Always disconnect the washing machine from the power mains before cleaning.
Page 40 CLEANING THE RINSING HOLES (UNDER THE AGITATOR IN THE DRUM) If you believe that objects like nails or paper clips fell into the washing machine drum, check the area underneath the agitator. Such objects may rust (corrode) and cause stains on your clothes. Nails and other sharp objects can also cause holes in the fabric.
Page 41: Errors - What To Do
ERRORS – WHAT TO DO? Disturbances from the environment (e.g. the power grid) may result in various error reports (see Troubleshooting table). In such case: • Switch oﬀ the appliance, wait for 1 minute, switch the appliance back on, and repeat the washing program. •...
Page 42 Problem/error Cause What to do? There are traces • The laundry was very greasy. • Wash the laundry again. When your laundry is of grease (or this heavily soiled, add more washing powder or grease rolls) on the use a liquid detergent in combination with a more clothes.
Page 43 Manual opening of washing machine door Washing machine door may be opened manually if the appliance is not connected to the power mains and if the water has been pumped out of the machine. A Choose the Spinning or Drain program to pump the water from the machine. If this does not work, water has to be drained from the washing machine drum manually.
Page 44 FAILURE DISPLAY In case of a failure while a program is in progress, the relevant Error XX is indicated on the display unit. Press the INFO button to display the Error error description. Error XX Info Exit Switch oﬀ the appliance and turn it back Errors indicated on the display unit may include the following: Error Error indication on the display...
Page 45 Error Error indication on the display What to do? unit DOOR UNLOCK ERROR Door is closed, but it cannot be unlocked. Turn off the Error while unlocking the door. washing machine, then turn it back on. If the error reoccurs, call a service technician.
Page 46: Service
SERVICE BEFORE CALLING A SERVICE TECHNICIAN 1, 2, 3 When you contact a service centre, please state the model (1), type (2), and serial number (3) of your washing machine. Model, type, and serial number are indicated on the rating (type) plate located on the washing machine door casing.
Page 47: Technical Information
TECHNICAL INFORMATION PRODUCT INFORMATION SHEET ACCORDING TO EU-REGULATION NO. 2019/2014 (depending of model) Supplier’s name or trade mark: Supplier’s adress ( Model identifier: General product parameters: Parameter Value Parameter Value Height 85,0 Rated capacity ( ) (kg) Dimensions in cm Width 59,5 Depth...
Page 48 PRODUCT INFORMATION SHEET ACCORDING TO EU-REGULATION NO. 2019/2014 (depending of model) Supplier’s name or trade mark: Supplier’s adress ( Model identifier: General product parameters: Parameter Value Parameter Value Height 85,0 Rated capacity ( ) (kg) Dimensions in cm Width 59,5 Depth 58,5 51,8...
Page 49 PERFORMANCE DATA Program Maximum load Temp. °C Eco 40-60 9 / 4,5* / 2,5** kg Universal wash 9 / 4,5* kg Mix/Synthetics 3,5 kg PRODUCT INFORMATION SHEET According to EU-Regulation No. 2019/2014 40 °C program for testing institutes. The 40 °C option has to be set. * Half load ** Quarter load ENERGY LABELLING...
Page 50 PROGRAM TABLE Program Universal wash 1800 2,10 2:26 Cotton X 40/20 X 1800 1,80 2:59/1:33 Eco 40-60 1800 1,00 3:30 Mix/Synthetics N/S 1200 0,60 1:54 Wool/Hand wash 0,28 0:52 Dark wash 1200 0,53 1:15 Time program 1000 Auto program 1800 Heavy 1800 2,50...
Page 51 W6098P/1 Program Universal wash 1800 2,10 2:26 Cotton X 40/20 X 1800 1,80 2:59/1:33 Eco 40-60 1800 1,00 3:30 Mix/Synthetics N/S 1200 0,60 1:54 Wool/Hand wash 0,28 0:52 Dark wash 1200 0,53 1:15 Time program 1000 Auto program 1800 Heavy...
Page 52 Adjustment of the displayed washing time Advanced technology allows the appliance to sense the amount of laundry and add the required amount of water during the washing process. Depending on the washing load, washing time can be longer or shorter and the time displayed will be adjusted accordingly.
Page 53 TABLE: WASHING MODE/TEMPERATURE Washing mode Program Universal wash 20°C - 90°C 30°C - 90°C 40°C-90°C - 90°C - 90°C - 90°C Cotton 20°C - 90°C 40°C-90°C - 90°C - 90°C - 90°C Eco 40-60 Mix/Synthetics 20°C - 60°C 30°C - 60°C 40°C-60°C - 60°C - 60°C...
Page 54 TABLE OPTIONS Options Program Universal wash 1800 Cotton 1800 Eco 40-60 1800 Mix/Synthetics 1200 Wool/Hand wash Dark wash 1200 Time program 1000/1800 Auto program 1800 Heavy 1800 Easy care 1200 Jeans 1200 Shirts 1200 Steam Refresh Quick Pro 1200/1800 Hygiene 1800 Sports wear 1200...
Page 55 DISPOSAL Disposal / recycling of packaging Our product packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately. The symbol on the product or its packaging indicates that the product should not be treated as normal household waste.
Page 56 NOTES...
Page 57 NOTES...
Page 58 NOTES...
Page 59 QUICK GUIDE SORT THE LAUNDRY. Close the zippers. Empty the pockets and turn them inside out. Check the laundry care symbols. Sort the laundry based on how heavily soiled it is, by colour, and by material. SWITCH ON THE MAIN ON/OFF SWITCH (ON/OFF) OPEN THE WASHING MACHINE DOOR AND INSERT THE LAUNDRY.
Page 60 Gorenje, Partizanska 12, 3320 Velenje, Slovenija www.asko.com WM75.2 en (02-23)

This manual is also suitable for:

W6098p/1

Asko W6098P User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Asko W6098P

Summary of Contents for Asko W6098P

This manual is also suitable for:

Table of Contents