Thank you for your purchase Thank you for your purchase! We are pleased that you have chosen Sears for your outdoor furniture purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team.
Safety Information SET UP YOUR FURNITURE PROPERLY Ensure that all parts are assembled properly and fully tightened as per the instructions. When placing in the desired location, ensure that all legs are resting on the same surface. You may adjust the footcaps as required to ensure that the item stands in a rigid position.
Warranty LIMITED WARRANTY-Continued • Straps and/or wicker. Straps and/or wicker weave (if applicable) are warranted against separation and tearing for one year from purchase date. Fading and/or discoloration resulting from exposure to the elements, oils, spills, fluids, chemicals, or any other cause is not covered. •...
Page 5
Care and Maintenance FRAMES Cleaning - Use mild soap and warm water. Do not use abrasive materials, cleansers or bleach products. Rinse with clean water and dry thoroughly. Maintenance - Periodically clean and dry thoroughly. Be sure to drain any water accumulated inside the frames.
Pre-Assembly PLANNING ASSEMBLY To prevent damage, place all parts on a soft surface during assembly. Remove all protective materials before beginning assembly. It takes about 90 minutes for two people to complete all the assembly. OBSERVE WEIGHT LIMITS The recommended weight limits for the following products are listed below: Swivel Rocker:250lbs CAUTION:If you overload your furniture, injuries can occur.
Pre-Assembly(continued) Package Contents QUANTITY PART ORDER PART DESCRIPTION CHAIR FRAME AR19875 SWIVEL BASE AR19876 & ROCKER ASSEMBLY Safety Information 1. EVERY BOLT NEEDS TO BE USED WITH A WASHER. 2. DO NOT FULLY TIGHTEN BOLTS UNTIL INDICATED IN STEP 2.
Assembly Instructions Positioning the chair frame Place the swivel base (B) on a flat, solid surface. Ensure the rocker portion (preassembled parts N) of the swivel base (B) is positioned all the way into the swivel base (B). It may have shifted or vibrated out during shipment. Note the arrow labels on the "U"...
Page 9
Assembly Instructions Attaching the chair frame to the chair base CAUTION: Failure to place the metal plates (H) above the "U" bar and below the rocker plates exactly as shown in the diagram will cause the bolt heads and nuts to damage the structure of the rocker plates.
Page 10
Pre-Assembly(continued) Package Contents QUANTITY PART ORDER PART DESCRIPTION AT71990 TABLE TOP AT71991 TABLE LEG Safety Information EVERY BOLT NEEDS TO BE USED WITH A WASHER.
Assembly Instructions Attach the tabletop. Place the table top (A) upside down on a flat, non-abrasive surface. Attach a table leg (B) to the table top (A) using three bolts (E) and washers (I). Repeat for the other three legs. Use the hex bolt driver(C) to tighten all bolts.
Page 12
Assembly Instructions Attach the tableleg Attach the metal plate(S) to table leg with top using two bolts(E) and washers(I). Repeat for to other three legs. Use the hex bolt driver (C) to tighten all bolts. Cover all bolts with covers (M).
Customer Service CUSTOMER SERVICE DEPT: 1337 TAYLOR FARM ROAD, SUITE 100, VIRGINIA BEACH, VA 23453-3142 FAX: (757) 368-0576 CUSTOMER SERVICE NOT LINE:1-800-416-3511 SERVICE HOUSE: MONDAY-FRIDAY 9:00AM-5:00PM (EASTERN TIME) E-MAIL: customerservice@va-cs.com...
Page 14
Please refer to part numbers when reordering For questions or comments about product: Email: www.agio-usa.com or Call toll-free: 1-800-416-3511...