Thank you for your purchase Thank you for your purchase! We are pleased that you have chosen Sears for your outdoor furniture purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team.
Safety Information Safety Information SET UP YOUR FURNITURE PROPERLY SET UP YOUR FURNITURE PROPERLY Ensure that all parts are assembled properly and fully tightened as per instructions. When placing in the desired location, ensure that all legs are resting on the same surface.
Warranty Warranty Cushions are covered for a period of one (1) year against defects in material or workmanship. Frames are warranted to be free from defects in material or workmanship for a period of one (1) year. Exclusions: Items used for commercial, contract, or other non- residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly is not covered.
Pre-Assembly Pre-Assembly PLANNING ASSEMBLY PLANNING ASSEMBLY To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning assembly. It takes about 30 minutes for two people to complete all the assembly. OBSERVE WEIGHT LIMITS OBSERVE WEIGHT LIMITS The recommended weight limits for the following product is listed below: Storage box:100 lbs...
Pre-Assembly(continued) Pre-Assembly(continued) Package Contents Package Contents QUANTITY QUANTITY PART PART DESCRIPTION DESCRIPTION REAR SKIRT FRONT SKIRT LEFT SKIRT RIGHT SKIRT BOTTOM HINGE BARS Safety Information Safety Information 1. EVERY BOLT NEEDS TO BE USED WITH A WASHER. 1. EVERY BOLT NEEDS TO BE USED WITH A WASHER. 2.DO NOT FULLY TIGHTEN BOLTS UNTIL INDICATED IN STEP 7.
Assembly Instructions Assembly Instructions Attaching the right skirt to the rear skirt Attaching the right skirt to the rear skirt PLACE THE REAR SKIRT B ON THE FLOOR VERTICALLY. PUT RIGHT SKIRT E TO AS SHOWN .MAKE SURE TWO PINS THREADED EXTENSION INTO TWO HOLES OF B .
Page 8
Assembly Instructions Assembly Instructions Attaching the left skirt to the rear skirt Attaching the left skirt to the rear skirt REPEAT STEP 1 TO THE OTHER SKIRT. MAKE SURE LINE UP THE EXTENSION ON THE REAR SKIRT B ON LEFT SKIRT D .
Page 9
Assembly Instructions Assembly Instructions Attaching the bottom Attaching the bottom LIE DOWN REAR SKIRT B WITH D AND E AS SHOWN. PUT BOTTOM ON THE REAR B , MAKE SURE TWO METAL TUBES THREADED EXTENSION INTO TWO HOLES OF B...
Page 10
Assembly Instructions Assembly Instructions Attaching the front skirt Attaching the front skirt PUT THE FRONT C ONTO THE ASSEMBLING STORAGE BOX. MAKE SURE ALL THE PINS AND METAL TUBES ARE THREADED THROUGH THEIR DESIGNATED POSITIONS. TIGHTEN HALFWAY WITH BOLTS QQ .
Page 11
Assembly Instructions Assembly Instructions Fastening the bolts Fastening the bolts TURN THE ASSEMBLING STORAGE BOX UPWARD AS SHOWN. CHECK AND MAKE ADJUSTMENT AS NEEDED. FULLY TIGHTEN ALL THE BOLTS QQ WITH ALLEN WRENCH JJ .
Page 12
Assembly Instructions Assembly Instructions Attaching the top Attaching the top MAKE THE HOLES ON B AND TOP A IN A LINE. PUT LONG BOLTS PP GOING THROUGH THE HOLES AND TIGHTEN WITH LOCKING NUTS AA BY USING WRENCH DD AND ALLEN WRENCH JJ FULLY TIGHTEN.
Page 13
Assembly Instructions Assembly Instructions Attaching hinge bars Attaching hinge bars FASTEN HINGE BAR G INTO THE HOLE OF A AS ILLUSTRATED AND FULLY TIGHTEN MAKE THE HOLES ON OTHER SIDE OF G AND SKIRT E IN A LINE. FASTEN IT WITH SMALL BOLTS UU AND FULLY TIGHTEN REPEATTHE SAME STEPS FOR THE OTHER SIDE .THEN USING THE ALLEN WRENCH HH .
Page 14
Assembly Instructions Assembly Instructions Adding the caps Adding the caps COVER BOLTS QQ AND LONG BOLTS PP WITH CAPS NN AND LOCKING NUT AA WITH CC .
Page 15
Assembly Instructions Assembly Instructions Now is ready for your enjoyment Now is ready for your enjoyment...