Table of Contents
Advertisement
3-7
Removing and Installing the PCIe Card
• The PCIe riser assembly does not include a riser card or any cabling as standard. To install a
PCIe card, a riser card must be installed.
Follow these instructions to install the left PCI Expansion card:
1.
Loosen the two thumbnail screws securing the riser bracket.
2.
Lift up the riser bracket out of system.
3.
Remove the screw securing the slot cover from riser bracket.
4.
Orient the PCIe card with the riser guide slot and push in the direction of the arrow until the PCIe
card sits in the PCIe card connector.
NOTE: Some riser brackets allow for single or multiple PCIe cards.
Repeat steps 3-4 as necessary.
5.
Secure the PCIe card with the screw.
6.
Repeat steps 1-2 to install the PCIe card into the system.
1
3
System Hardware Installation
- 35 -
2
1
4
5
Advertisement
Table of Contents
