Description Of The Milk Container" (Page 3 - D); Setting Up The Appliance U - DeLonghi PRIMADONNA SOUL ECAM61 3 Series Instructions For Use Manual

C4. Water softener lter (*certain models only)
C5. Cleaning brush
C6. Power cord
C7. Descaling spout (keep the spout safely after each use)
Accessories with certain models only:
C8. Co ee pot (*certain models only)
C9. Travel mug (*certain models only)
2.4 Description of the milk container"
D1. Milk container lid
D2. Milk re ll lid
D3. Froth adjustment/Clean dial)
D4. Dial seat
D5. Milk container connector (removable for cleaning)
D6. Milk spout seat
D7. Milk spout (adjustable height)
D8. Milk spout extension (adjustable
D9. Milk intake tube
D10. Milk container (*thermal in certain models)

3. SETTING UP THE APPLIANCE U

Please note:
• Possible traces of co ee in the mill are the result of settings
tests performed on the appliance before sale, proof of the
meticulous care and attention we invest in our products.
• The rst time you use the appliance, all removable ac-
cessories (milk container (D), travel mug (C9), co ee pot
(C8), water tank (A20)) destined to come into contact with
water or milk should be rinsed with hot water. We recom-
mend washing the milk container in a dishwasher.
• You should customise water hardness as soon as possible
following the instructions in section "18. Setting water
hardness u".
1. Plug the power cord connector (C6) into the socket (A8) at
the back of the appliance and connect the appliance to the
mains power supply ( g. 1). Make sure the main switch (A7)
at the back of the appliance is pressed ( g. 2);
2. Press the ag corresponding to the desired language.
(page 3 - D)
1
Then follow the instructions which appear on the appliance
display (B5):
3. Remove the water tank (A20) ( g. 3) and ll to the MAX
line (marked on the inside of the tank) with fresh water
( g. 4);
4. Then put the tank back ( g. 5) and con rm by pressing
"Next";
5. Fill the beans container (A6) ( g. 6), then con rm by press-
ing "Next".
2
6. Insert the descaling spout (C7) (in the Starter Set) on the
milk container connector (A13) ( g. 7) and place a contain-
er with a minimum capacity of 100 ml under the co ee
spouts (A14) and descaling spout ( g. 8);
6
3
5
7
4
6
8