Kodak PIXPRO AZ528-BK User Manual page 42

Settings of Smart Device:
1. Enable the Wi-Fi® of smart device and then search surrounding wireless devices.
2. Select the name of camera SSID to be connected and then input the eight-digit number
password after WPA2-PSK on the camera.
3. Click the icon of the PIXPRO Remote Viewer App
Set up completion:
Once the App is connected to the camera, functional operation can be enabled on the smart
device.
Every AZ528 camera is shipped with a default factory Wi-Fi® password that is
randomized and unique to that camera and will not change unless you wish to reset
the password with a new randomly generated password. If you wish to change the
Wi-Fi® password in your AZ528 from the assigned, unique factory password, you
can do so by selecting and using the refresh setting. If "refresh" is selected, a new
random password will be generated and saved in the camera until changed or if you
use the "Reset" function. If you reset your AZ528 to the factory settings, then the
initial, randomly factory assigned and unique Wi-Fi® password will be restored to
your camera. (Please refer to Reset instructions on page 98).
to enable the App.
41