Soundstream Rubicon 1002 Owner's Manual And Installation Manual page 7

Power LE D - Indicates amplifier power, either in High Power or Auto
1.
High Current.
2. Subsonic/Hawkins Bass Control Switch - Selectable high pass filter
frequency range. Select "SUB SONIC" to engage the Sub Sonic filter at
13Hz with no boost. Select "Hawkins Bass Control" to engage the Sub
Sonic filter at 45 Hz with available boost.
3. ST/MONO Switch - "MONO" for bridged mono operation with both
input signals (right and left summed). "ST" for normal stereo or mixed
mono operation.
4. All Pass, High Pass, Low Pass XOVER Switch - Selectable low pass
filter for driving subwoofers at 89Hz.
XOVER" and the "H.P. XOVER" engaged at the same time.
5. FUSE - Main power supply fuse. Warning: Replace only with the same
value fuse!
6. +12V - Connected to a fuse or circuit breaker, then to the battery's
positive terminal
7. GND - Main ground connection. Bolt to a clean chassis point in the
vehicle.
8. REMOTE - Remote turn-on input from the head unit. Accepts +12V.
9. Speaker Connection Terminal - Speaker connections for Ch's 1 & 2.
10. Hawkins Bass Control "Boost" Adjustmen
of boost when the Hawkins Bass Control circuit is engaged.
11. XOVER Filter Adjustmen t - Frequency adjustment control for the High
Pass or Low Pass filter.
12. Input Level - Input level control.
13. RCA Inputs - Right and Left channel RCA inputs.
14. RCA Line Outputs - Full range line level outputs to drive an external
amplifier.
K e y to Callouts
Note: Do not have the "L.P.
7
t - Varies from 0 to +9 dB