Advertisement
CAUTION
•
• This accessory is for indoor use only.
• This accessory is intended for domestic use only.
Electrolux will not accept any liability for
possible damage caused by improper or
incorrect use.
• When cleaning, use only a soft cloth with an
unscented mild soap and lukewarm water.
• Never use hot water, solvents, commercial
kitchen cleaners, aerosol cleaners, metal
polishes, caustic or abrasive cleaners, or
scourers to clean the accessory as they may
damage it. Many commercially available
cleaning products and detergents contain
solven that will damage your accessory.
LOCATE HANDLE BAR AND HANDLE KIT
•
The bar handle is securely packed in the rear left
hand EPS corner post packing.
Handle
enclosed
Bar
handle
The handle kit is located in the bottom of your
•
refrigerator crisper or freezer drawer.
INSTALLATION
Bar handle assembly
•
Using a suitable work space, place handle bar
with screw holes facing up on a soft surface to
prevent damage to handle.
•
Locate and position the three handle pedestals
on handle bar so that pins locate in holes and
screw holes align. Note that the pedestals are
identified top, bottom and center to aid
assembly.
•
Using Allen key, assemble the handle brackets
to handle bar using the M4 screws provided.
•
Ensure all screw are tight.
English 13
Handle Kit
Advertisement
