FMI Face Mantels FM36TO Assembly And Installation Instructions

Models: FM36TO AND FM42TO
ASSEMBLY AND INSTALLATION INSTRUCTIONS
IMPORTANT: Read entire instruction sheet be-
fore assembling or installing mantel kit.
The FM36 series face mantels are only approved
for use with any FMI PRODUCTS, LLC 36'' wood
or gas fireplace. Do not use mantel with any
other product.
The FM42 series face mantels are only approved
for use with any FMI PRODUCTS, LLC 42'' wood
or gas fireplace. Do not use mantel with any
other product.
This mantel kit contains the following:
• Mantel pieces (unassembled)
#1 Top Assembly
#2 Left Leg
#3 Right Leg
#4 Top Inside Trim
#5 Left Inside Trim
#6 Right Inside Trim
*Hardware Package
Face Mantels
For more information, visit www.fmiproducts.com
The hardware items needed from hardware kit:
• 6 - 1 1/4" Screws
• 9 - 1 1/2'' Finishing Nails
• 4 - 3'' Wood Screws
• 4 - Wall Anchors
• 4 - Button Caps
Tools required:
• #2 Phillips Screwdriver
• Drill
• 1/16'' Drill Bits
If any wood pieces are missing or damaged, contact the dealer
where you purchased this mantel for replacement. If hardware
is missing or damaged, contact FMI PRODUCTS, LLC at
1-866-328-4537 for referral information. You can also visit
FMI PRODUCTS, LLC's web site at www.fmiproducts.com.
Note: Gather all mantel pieces together before assembling
mantel.
WARNING: Only use screws provided to
assemble mantel. Damage to mantel will result
if other screws are used for this purpose.