8.1.2.
Programming the user-defined P1 key (optional)
Proceed as follows to program the user-defined P1 key
Press the Fn + F4 key combination:
Click on Browse to give the key a function.
Select a program and click on Open.
Confirm your selection with OK in the next Window.
9.
The Touchpad
In normal mode, the cursor follows the direction specified by moving your fingers
in the corresponding direction on the touchpad.
ATTENTION!
Do not use pens or other objects as this can damage your touchpad.
The left and right mouse buttons are found in the lower section of the touchpad
and can be used in the same way as those on a conventional mouse.
You can also perform a click or a double-click on the touchpad directly by tapping
the touchpad surface once or twice briefly.
In the Windows
8 control panel, under the Mouse item, you will find a number of
®
useful settings to simply your day-to-day tasks.
30 of 71