Table of Contents
Advertisement
White Streaks Appear
Check paper and print quality settings.
Check1
Printout Results Are Unsatisfactory
Check the estimated ink levels in the FINE cartridges. When a FINE cartridge
Check2
runs out of ink, replace it with new ones.
Checking the Ink Status with the Ink Lamps on the Operation Panel
Replacing a FINE Cartridge
Is the FINE cartridge installed properly?
Check3
If the FINE cartridge is not installed securely, ink may not be ejected correctly. Retract the output tray extension
and the paper output tray, open the cover, remove the FINE cartridges and then check the following.
•
• Check that there is no orange tape left on the FINE cartridge.
If the orange tape remains on the FINE cartridge, peel it off.
• Then install the FINE cartridges again. Push up the FINE cartridge until it clicks into place.
•
After confirming that the FINE cartridge is installed properly, close the cover.
Are the print head nozzles clogged?
Check4
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.
227
Advertisement
Table of Contents
