Starting The Programme - Beko DFN15410W User Manual

Operating the product
flash. With a third press, 6-hours time
delay icon will disappear and 9-hours
time delay icon will start to flash.
5. Press the Start/Pause key to activate
the time delay.
C
While the Time Delay is active
the relevant delay period and
start icon will be displayed
steadily. For 0-3 hours time
delay the 3-hours time delay
icon will be displayed, for 3-6
hours time delay the 6-hours
time delay icon will be displayed,
and for 6-9 hours time delay the
9-hours time delay icon will be
displayed.
C
If the door is opened while
the Time Delay is active, the
countdown will be paused and
start icon will start to flash.
C
To exit time delay mode
without activating the Time
Delay, press the time delay key
until the 3-6-9 hours duration
indicators disappear. Time Delay
mode will be cancelled and the
programme selection mode will
be activated.
Changing the settings while Time
Delay function is active
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the
duration of delay time.
To cancel the Time Delay function
1. Press and hold Start/Pause/Cancel key
for 3 seconds. Time delay period and
start/pause icon will start to flash and
Time Delay function will be cancelled.
Dishwasher / User's Manual
C
You can select and start a
new programme following the
cancellation of Time Delay
function.
C
Time Delay function cannot be
set after the programme starts.

Starting the programme

To start your machine after selecting the
programme and auxiliary functions, press
Start/Pause/Cancel key.
C
Your machine performs water
softening depending on the
hardness level of the supply
water. Due to water softening
process the programme
duration may change. The
programme duration can also
change while the programme
is running depending on the
ambient temperature where
your machine is installed,
temperature of the supply
water and amount of the dishes.
C
Pay attention not to open the
door of the machine when it is
running. Stop the machine by
pressing Start/Pause/Cancel
key if you have to open the
door. Then, open the door of
the machine. There may be a
rush of vapour when you open
the door of your machine; be
careful. Close the door of your
machine and press Start/Pause/
Cancel key again. Programme
will resume running.
33 / 44 EN