Table of Contents
Advertisement
the time delay key until the
3-6-9 hours duration indicators
disappear. Time Delay mode will
be cancelled and the programme
selection mode will be activated.
Changing the settings while Time
Delay function is active
While the Time Delay function is
activated, you cannot make changes
in the washing programme, auxiliary
functions or the duration of delay
time.
To cancel the Time Delay function
1. Press and hold Start/Pause/
Cancel key for 3 seconds. Time
delay period and start/pause icon
will start to flash and Time Delay
function will be cancelled.
C
You can select and start a
new programme following
the cancellation of Time Delay
function.
C
Time Delay function cannot be set
after the programme starts.
Starting the programme
To start your machine after selecting
the programme and auxiliary
functions, press Start/Pause/Cancel
key.
C
Your machine performs water
softening depending on the
hardness level of the supply water.
Due to water softening process
the programme duration may
change. The programme duration
can also change while the
programme is running depending
on the ambient temperature
where your machine is installed,
temperature of the supply water
and amount of the dishes.
C
Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing
Start/Pause/Cancel key if you
have to open the door. Then, open
the door of the machine. There
may be a rush of vapour when you
open the door of your machine;
be careful. Close the door of your
machine and press Start/Pause/
Cancel key again. Programme will
resume running.
C
The machine will remain silent
in pause mode for some time
in order to remove the water in
the machine and on the dishes
completely and to have the water
softener cleaned, and then it will
resume running in drying mode.
Cancelling the programme
1. Press Start/Pause/Cancel key for 3
seconds to cancel the programme.
2. Release the key when the
programme indicator starts
flashing. For a couple of minutes
the machine will fulfill the
necessary operations required to
cancel the programme.
C
There might be residues of
detergent or rinse aid in the
machine and/or on the pieces
being washed depending on the
step the programme you have
cancelled was in.
Salt indicator ( )
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever salt indicator appears on
the display of your machine.
35 EN
Advertisement
Table of Contents
