Auxiliary Functions - Beko DFN29330X Instruction Manual

Auxiliary functions

Washing programmes of your
dishwasher are designed to obtain
the best cleaning effect, considering
the type of the soil, soiling degree and
properties of the dishes to be washed.
Auxiliary functions are provided in
order to enable you to save time, water
and energy and to perform a more
comfortable washing with conditions
specific to you.
C
Auxiliary functions may cause
changes in the programme duration.
C
Auxiliary functions are not suitable
for all washing programs. Indicator
of the auxiliary function that is not
compatible with the programme will
not be active.
To add auxiliary function to the
programme:
1. Select the desired washing
programme by pressing the
programme selection key.
2. In the selected washing
programme, if auxiliary function
is selected, its symbol will be
displayed on the screen. If the
function button is pressed again the
symbol will disappear and selection
is cancelled.
3. Selection will be cancelled when
you press the function key again.
Half Load function
It is used to operate the machine
without loading it completely.
It is used to operate the machine
without loading it completely.
1. Load your dishes in the machine
as you like.
2. Turn the machine on with On/Off
key.
3. Select the desired programme and
press the Half Load key. The Half
Load indicator will light on the
display in the Function Selected
indicator.
4. Start the program by pressing
Start / Pause / Cancel key.
C
With the Half Load function you
can save both water and power
while using the lower and upper
baskets of the machine.
Fast+ Function
It shortens the time of the washing
cycle selected and decreases water
consumption by enabling washing
under higher pressure.
AquaIntense Function
dishes places in the right side of the
lower basket. It will give better results
to place the most soiled dish to the
right front side.
C
Do not try to remove the
AquaIntense impeller
IonGuard Function
Press IonGuard function button on
the panel to activate the IonGuard
function. While the function is active,
the system is activated intermittently
and prevents formation of bad odors
due to putrefication. If this function is
selected, it will be activated while the
product is turned off and the IonGuard
indicator on the panel will flash, a
ventilation noise can be heard, this is
normal. Until the function selection
is disabled, system is automatically
activated intermittently.
34 EN
AquaIntense
impeller located
under the lower
impeller helps
washing your
heavily soiled