Table of Contents
Advertisement
Gas Pipe and Electrical Outlet Locations
Ventilation
• Do not locate your range where it may be subject to strong drafts. Any openings in the floor or wall
behind the range should be sealed. Make sure the openings around the base of the range that supply
fresh air for combustion and ventilation are not blocked by carpeting or woodwork.
• This appliance must not be installed with a ventilation system that blows air downward toward the
range. This type of ventilation system may cause ignition and combustion problems with the gas cooking
appliance resulting in personal injury or unintended operation.
Flooring
• Your range, like many other household units, is heavy and can be installed on soft floor coverings such
as cushioned vinyl or carpeting. Use care when moving the range on this type of flooring.
• When the floor covering ends at the front of the range, the area that the range will be installed on should
be built up with plywood to the same level or higher than the floor covering. This will allow the range to
be moved for cleaning and servicing, as well as provide proper air flow to the range.
• Make sure the floor covering can resist temperatures of at least 167 °F (75 °C). See the Installation Safety
Instructions included in this manual.
Ambient Temperature
• Make sure the wall coverings around your range can resist the heat generated up to 194 °F (90 °C) by the
range. See the Installation Safety Instructions included in this manual.
Leveling
Leveling the Range
Level the range by adjusting the leveling legs with
a wrench. Extending the legs slightly may also
30"
(76.2 cm)
/
7
14
"
16
(20 cm)
/
11
"
13
16
(30 cm)
/
3
6
"
16
(8.5 cm)
/
6
11
"
16
(17 cm)
3"
/
17
15
"
16
/
(7.6 cm)
5
14
"
(45.6 cm)
16
(15 cm)
make it easier to insert the rear leg into the anti-tip
bracket.
INSTALLATION
15
Advertisement
Table of Contents
