LG GF-MV600 Owner's Manual page 15

- Spanner Type B
Levelling the Appliance
The appliance has two front levelling legs. Adjust
the legs to alter the tilt from front to back or side to
side. If the appliance seems unsteady, or the doors
do not close easily, adjust the appliance's tilt using
the instructions below:
1
Turn the nut in the door hinge to adjust the
height. It may take several turns of the leveling
leg to adjust the tilt of the appliance.
NOTE
• A flare nut wrench works best, but an open-end
wrench will suffice. Do not over-tighten.
2
Open both doors and check to make sure that
they close easily. If the doors do not close
easily, tilt the refrigerator slightly more to the
rear by turning both levelling legs to the left. It
may take several more turns, and be sure to
turn both levelling legs the same amount.
Door Alignment
The fridge and freezer doors have adjustable nuts,
located on the bottom hinge, to raise and lower the
door for proper alignment.
If the space between the doors is uneven, follow
the instructions below to align the door using the
wrench (included with the owner's manual).
Freezer Door
Open the freezer door and use the wrench to turn
the nut in the door hinge to adjust the height.
Fridge Door
The door alignment method may differ depending
on the model.
Fridge Type A
Both the left and right fridge doors have an
adjustable nut, located on the bottom hinge, to
raise and lower them to align properly.
If the space between the doors is uneven even
after the door bins are filled, follow the instructions
below to align the doors evenly:
Use the wrench (included with the owner's manual)
to turn the nut in the door hinge to adjust the
height. Turn the nut to the right to raise the door or
to the left to lower it.
INSTALLATION
15