GMC Hummer EV 2023 Owner's Manual page 247

GMC Hummer EV Owner Manual (GMNA-Localizing-MidEast-16569278) -
2023 - CRC - 1/25/23
Warning (Continued)
Read all the safety warnings and
instructions before using this product.
Failure to follow the warnings and the
instructions may result in electric
shock, fire, and/or serious injury.
Never leave children unattended near
the vehicle while the vehicle is
charging and never allow children to
play with the charge cord.
If the plug provided does not fit the
electrical outlet, do not modify the
plug. Arrange for a qualified electrician
to inspect the electrical outlet.
Do not put fingers into the electric
vehicle connector.
Warning
To reduce the risk of fire, installations
shall comply with the requirements of
National Electric Code IEC 60364
Electrical Installations in Buildings,
depending on the region in which the
unit is being installed. The installer
Warning (Continued)
shall comply with any additional local
requirements mandated by the
country and/or municipality.
Do not use this product if the flexible
power cord or the electric vehicle cable
is frayed, has broken insulation,
or shows any other signs of damage.
Do not use this product if the
enclosure or the vehicle plug is
broken, cracked, open, or shows any
other indication of damage.
The plug must be plugged into an
appropriate electrical outlet that is
properly installed in accordance with
all local codes and ordinances. Do not
modify the plug provided with the
product. If the plug does not fit the
electrical outlet, have a proper
electrical outlet installed by a qualified
electrician. If ground is missing, the
charge cord indicators will indicate an
electrical system fault and the vehicle
may not charge.
(Continued)
Driving and Operating
Installing and Operating the Portable
Charge Cord
The charge cord must be on a dedicated
individual branch circuit. A dedicated circuit
ensures that there is enough power
available without overloading the system.
If a dedicated circuit is not used, the circuit
breaker could trip or open. If a dedicated
circuit is not available, contact a a qualified
electrician. See Grounding Instructions
later on in this section.
1. Mount the charge cord to reduce strain
on the electrical outlet/plug. Mount the
control box in a suitable location to
prevent physical stress on the electrical
outlets and charge cord components.
247