GMC Hummer EV 2023 Owner's Manual page 113

GMC Hummer EV Owner Manual (GMNA-Localizing-MidEast-16569278) -
2023 - CRC - 1/25/23
Charge Later
Instead of charging immediately to a desired
Charge Level, you may choose to delay the
charge to the vehicle and have it complete
by your desired departure time. This may be
a more economical choice and a more
efficient use of energy when charging at
home. To use this mode, touch the Charge
Later tab from the Charging screen.
With Charge Later selected, the Charging
screen displays:
Text explaining that your vehicle will
delay the planned charge to be ready by
the time specified.
Charge Complete by: The time at which
the vehicle will reach the desired Charge
Level.
Charge Level: The percentage to which
you would like the vehicle to charge.
An estimate of the vehicle s range upon
completing the charging session.
Preconditioning: Allows the vehicle to
heat or cool the cabin to your desired
temperature using energy from the
charger. This means energy from the
battery is not used to condition the cabin,
ensuring the vehicle gets the greatest
range from the charging session.
Preconditioning happens at the end of the
charge, and right before the
departure time.
To set the time desired for the vehicle to
complete charging, touch the time listed
under Charge Complete By. This will display
the Charge Complete By dialog.
The Charge Complete By dialog displays:
A time selector that allows you to specify
the hour, the minutes in 15 minute
increments at which the vehicle will reach
the desired Charge Level.
Instruments and Controls
z
An allowing you to close the Charge
Complete By dialog. Settings made here
are automatically saved when the dialog
is exited.
Drag the appropriate sections of the time
selector to set the Charge Complete By time.
z
Touch to exit the Charge Complete By
dialog and accept the changes made. When
the dialog closes, the charging information
listed on the Charging screen will update to
reflect any changes made. If the time
specified does not allow the vehicle enough
time to reach the desired Charge Level, a
message displays and you can choose to
alter either Charge Complete By time or
desired Charge Level.
To adjust desired Charge Level in Charge
Later mode, see Charge Now earlier in this
section.
Setting the Preconditioning preference:
Touch the switch to turn on Preconditioning.
Preconditioning temperature can be set in
Settings, or by touching Preconditioning on
this screen.
113