Bosch Professional GBH 2-23 E Original Instructions Manual page 6

OBJ_BUCH-1281-005.book Page 6 Tuesday, October 17, 2017 2:10 PM
6 | English
Hammer Safety Warnings
 Wear ear protectors. Exposure to noise can cause hear-
ing loss.
 Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
 Hold the tool by the insulated gripping surfaces when
performing operations where the application tool or
the screw could contact hidden wiring or its own power
cord. Contact with a "live" wire will also make exposed
metal parts of the power tool "live" and shock the operator.
 Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Technical Data
Rotary Hammer
Article number
Speed control
Right/left rotation
Rated power input
Impact rate
Impact energy per stroke according to
EPTA-Procedure 05/2009
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
1 609 92A 40R | (17.10.17)
Intended Use
The machine is intended for hammer drilling in concrete,
brick and stone. It is also suitable for drilling without impact in
wood, metal, ceramic and plastic. Machines with electronic
control and right/left rotation are also suitable for screwdriv-
ing.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 SDS-plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Rotational direction switch (GBH 2-23 RE)
5 Lock-on button for On/Off switch
6 On/Off switch
7 Release button for drilling/hammer drilling selector
switch
8 Selector switch for drilling/hammer drilling
9 Button for depth stop adjustment
10 Depth stop
11 Auxiliary handle (insulated gripping surface)
12 Handle (insulated gripping surface)
13 Securing screw for key type drill chuck*
14 Key type drill chuck*
15 SDS-plus adapter shank for drill chuck*
16 Extraction sleeve of the dust extraction attachment*
17 Clamping screw for the dust extraction attachment*
18 Depth stop of the dust extraction attachment*
19 Telescopic pipe of the dust extraction attachment*
20 Wing bolt of the dust extraction attachment*
21 Guide pipe of the dust extraction attachment*
22 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GBH 2-23 S
3 611 B50 2..
–
–
W 650
-1
min 4400
J 2.5
GBH 2-23 E GBH 2-23 RE
3 611 B50 8.. 3 611 B50 4..

–
650 650
0–4400 0–4400
2.5
Bosch Power Tools


2.5