Control Panel - IKEA FINSMAKARE Installation Instructions Manual

ENGLISH

Control panel

BUT-
TON FUNCTION
Turns the motor on/off at speed one.
Attention: the product starts with the filter
alarm disabled.
Press and hold the button for approximately
A
2 seconds, with all loads deactivated (mo-
tor+lights), to activate the grease filter
Spee
alarm. LED (B) flashes twice for confirma-
d
tion.
To turn off the alarm, press the button
again and hold it for at least 2 seconds. LED
(B) flashes once.
Turns the motor on at speed two / Activates
the carbon filter alarm.
Attention: the product starts with the filter
alarm disabled.
Press and hold the button for approximately
B
2 seconds, with all the loads turned off (Mo-
tor+Lights), to turn the activated carbon fil-
Spee
ter alarm on. LED (A) flashes twice to con-
d
firm.
To turn off the alarm, press the button
again and hold it down for at least 2
seconds. LED (A) flashes once. Only for the
recirculation mode.
Starts the motor at speed three / Resets the
grease filters saturation alarm.
C
Press and hold the button for approximately
Spee
2 seconds, with all loads deactivated (mo-
d
tor+lights), to reset the filter saturation
alarm. LED (A) flashes three times.
Turns the motor on at Booster speed.
This speed is timed for 6 minutes. At the
D
end of this time, the system returns auto-
matically to the speed that was set before. If
Spee
it is activated with the motor turned off, it
d
will switch to OFF at the end of the time. To
deactivate it, press button D or press button
A.
Press briefly: Turns the lighting system on
E
and off at maximum intensity.
Ligh Press and hold to change the lighting in-
t tensity up or down.
Filters alarm
When the filter alarm is activated, the
following messages appear depending on the
circumstances:
Grease filter cleaning required alarm: button
"A" flashes once per second.
Odour filter cleaning required alarm: button
"A" flashes twice per second.
Once the filters have been regenerated reset
the alarm signal.
11