Advertisement
OPERATION
1. Clock Setting
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring
once.
The input time should be within 1:00--12:59(12 Hour).
a. Press " Clock/Timer " once, the screen will show "00:00".
b. Press the number buttons to set clock, if the input time not in 1:00~12:59, the
button will not ring.
c. Press " Clock/Timer " to finish clock setting. ":" will flash, and the time will light.
• If the clock is not set, it would not function when powered.
NOTE
• During the process of clock setting, if you press " STOP/Cancel ", the
oven will go back to the previous status automatically.
2. Timer Function
a. In the standby state, press the " Clock/Timer " key twice, and the LED will flash and
display "00: 00" to prompt for the time.
b. Press the number keys to enter the timing time, the LED moves to the right to
display the setting time, the setting bit flashes and other bits are always on, with a
maximum setting of 99 minutes and 99 seconds. It can be set cyclically. When 4
digits are entered, the first digit flashes.
c. After the setting is completed, press the " START/+30Sec. " key to confirm the
timing clock, and the LED countdown displays the set timing time.
d. When the timing clock arrives, the buzzer will sound five times to return to the
standby state. If the clock has been previously set (12-hour clock), the current time
is displayed.
d. During the operation of the alarm clock, opening the oven door or closing the oven
door has no influence on the alarm clock, and the alarm clock continues to operate;
Press " STOP/Cancel " key to cancel the alarm clock directly and return to the standby
state.
• When the first digit of the digital tube is "0" in the running state, it will not be
displayed.
• Timer cannot query the clock during operation.
INSTRUCTION FOR USE
EN-14
Advertisement
