Table of Contents
Advertisement
I
NSTALLATION
Mounting the Midrange
1. Cut the proper size hole for the midrange/woofer.
• For the RFA-44, cut a 3
• For the RFA-54, cut a 4
• For the RFA-64, cut a 5
2. Place the mounting ring over the mounting hole and mark the
location of the screw mounting holes.
3. Remove the ring. Drill the holes for the screws using a 1/8" drill bit.
4. Route the wire through the hole.
5. Place the mounting ring over the hole.
6. Attach the wires and be sure to observe the proper speaker polarity.
7. Place the speaker into the hole and screw the speaker into place.
Be careful not to bend the speaker frame during this step.
8. Press the speaker grille into the mounting ring.
13
⁄
" (96.8mm) diameter hole
16
7
⁄
" (123.8mm) diameter hole
8
5
⁄
" (142.9mm) diameter hole
8
– 4 –
I
®
®
N
S
T
A
L
L
A
T
I
O
N
Advertisement
Table of Contents
