Adding Salt - Beko DFN39430X User Manual

Preparation
C
If your machine is equipped with
"Automatic Water Hardness
Detection System", water
hardness adjustment will be
made by the service/user as
standard during first installation.
If you move your house, your
machine will automatically
perform water hardness level
adjustment according to the
water hardness in the new place
you have moved in.

Adding salt

Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used for
this purpose.
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
C
It is recommended to use
granule- or powder-formed
softening salts in the water
softening system. Do not use
salts that do not completely
dissolve in water such as table
salt or rock salt. Otherwise the
performance of the system may
deteriorate in time.
C
Salt reservoir will be filled with
water when you start the
product. For this reason, add salt
before operating the machine.
1. Firstly, take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A, B).
14 /44 EN
3. Add 1 litre of water to salt reservoir of
your machine only in initial use (C).
4. Fill the salt reservoir with salt by
using the salt funnel (D). To speed up
dissolution rate of salt in water, stir it
with a spoon.
Dishwasher / User's Manual