Phone Name; Transferring Sound; Using Bluetooth - Sony Ericsson Z1010 User Manual

Connectivity

Phone name

You can choose a name for your phone. This name
is shown in other devices when your phone is
found, and it is also used for the infrared port. In
order for your phone to be found, when searched
for by other Bluetooth devices, you must make sure
that Bluetooth is turned on and your phone is
visible to other devices.
To enter a phone name
} Connectivity } Bluetooth } Options
} Phone
name.
To hide or show your phone when

using Bluetooth

1
} Connectivity } Bluetooth } Options
} Visibility.
2
Show phone
Select
74
This is the Internet version of the user's guide. © Print only for private use.
Hide phone.
or
To add a Bluetooth handsfree
to your phone
1
} Connectivity } Bluetooth }
The first time you add a handsfree,
handsfree device to use with the phone?
displayed, press Yes.
2
If you already have a handsfree in your list of
} Connectivity } Bluetooth
devices,
} Handsfree } My handsfree } New
and press Add.

Transferring sound

When you are using a Bluetooth handsfree with
your phone, you can choose where the sound
should be transferred during a call. You can also
select where the sound should be handled when
answering an incoming call with the keypad.
To transfer sound when
using a handsfree
1
During a call, press
Transfer sound.
2
Select to transfer sound either to the phone or
to other handsfree devices that have been
added to your phone.
Handsfree.
Add a
is
handsfree,
and select