Gigabyte G363-ZR0-LAX1 User Manual page 72

Parameter
PCI Bus Driver Version
GENZ_#_Lanes Configuration
U2_P0_P_#_Lanes Configuration
U2_P1_P_#_Lanes Configuration
OCP Lanes Configuration
GENZ_#_I/O ROM
(Note1)
U2_P0_P_#_I/O ROM
U2_P1_P_#_I/O ROM
OCP I/O ROM
GENZ_#__Link Speed
U2_P0_P_#_Link Speed
U2_P1_P_#_Link Speed
OCP Link Speed
PCI Devices Common Settings
Above 4G Decoding
SR-IOV Support
Relaxed Ordering
(Note1) This section is dependent on the available Riser Slot.
(Note2) This section is dependent on the available U2 connector.
Description
Displays the PCI Bus Driver version information.
(Note1)
Change the PCIe lanes.
(Note2)
Options available: Disabled, Auto, x16, x8x8, x8x4x4, x4x4x8,
(Note2)
x4x4x4x4. Default setting is Auto.
When enabled, this setting will initialize the device expansion ROM
(Note2)
for the related PCI-E slot.
(Note2)
Options available: Disabled, Enabled. Default setting is Enabled.
(Note1)
Configure PCIe max link speed.
(Note2)
Options available: Auto, Gen5, Gen4, Gen3, Gen2, Gen1.
(Note2)
Default setting is Auto.
Enable/Disable memory mapped I/O to 4GB or greater address
space (Above 4G Decoding).
Options available: Disabled, Enabled. Default setting is Enabled.
If the system has SR-IOV capable PCIe devices, this item Enable/
Disable Single Root IO Virtualization Support.
Options available: Disabled, Enabled. Default setting is Enabled.
Enable/Disable PCI express device relaxed ordering.
Options available: Disabled, Enabled. Default setting is Enabled.
BIOS Setup
- 74 -