Advertisement
专 业 影 室 闪 光 灯
Professional Studio Flash
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋
Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong
Town, Baoan District, Shenzhen 518103, China
电话/Tel: +86-755-29609320(8062)
传真/Fax: +86-755-25723423
邮箱/E-mail: godox@godox.com
http://www.godox.com
Instruction Manual
说
明
手
册
Chinese English Bilingual
705-QS2000-00
中英文双语
Made In China
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Godox QSII Series
Summary of Contents for Godox QSII Series
- Page 1 专 业 影 室 闪 光 灯 Professional Studio Flash 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong Town, Baoan District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com http://www.godox.com...
-
Page 2: Table Of Contents
Warning To prevent damage to the product or injury to you or to others, read the Thanks for choosing QSII series studio flash. It is a durable and high- following warnings in their entirety before using this product. Keep these performance strobe with complete functions to help professional safety instructions where users can read them for ready reference. -
Page 3: Names Of Parts
LCD Panel NAMES OF PARTS Body PROP 1. Built-in 2.4G Wireless Transmission 9. Modeling Lamp is off 2. Built-in Wireless Channel 10.Modeling Lamp is in the PROP 3. Built-in Wireless Channel Dial mode 4. Slave Model Indicator 11.Modeling Lamp shows the power in 5. - Page 4 3. When PROP is displayed, short press the <MOD/OFF> Button can back to OPERATIONS <OFF> mode. 4. When in NON OFF mode, long press the <MOD/OFF> Button for 2 seconds to Flash Preparation switch on the function that the modeling is off when triggering the flash. Now 1.
- Page 5 Slave Trigger Model Wireless Control Function Three slave triggering models are available and can be set by pressing slave The flash unit has built-in 2.4G wireless transmission, which can be used model button (6). together with X1 and XT16 flash trigger. No optical control: S1 or S2 is not displayed on the LCD panel, indicating the Synchronously press the <GR/CH>...
- Page 6 Flash Duration 1/2000~1/800s Parameters output from the sync cord jack For full instructions on the use of FT series remote control, see its user manual. 5V/200mA (only for Godox receiver) Parameters output from the USB port AC220V-240V~50Hz: AC220V-240V~50Hz: AC220V-240V~50Hz: Fuse...
Need help?
Do you have a question about the QSII Series and is the answer not in the manual?
Questions and answers