Bosch HBF010BR1Z User Manual And Installation Instructions page 29

Table of Contents

Advertisement

Cable colour
Blue
Brown
15.10 Only Sweden, Finland and Norway
You can also connect the appliance to the protective
contact system with the enclosed plug. The plug must
be accessible following the installation. If the plug can
no longer be accessed following installation, provide a
separator in the phases in the fixed electrical installa-
tion in accordance with the set-up instructions.
15.11 Securing the appliance
¡ Slide the appliance in fully and centre it.
¡ Screw the appliance into place.
The gap between the worktop and the appliance must
not be closed by additional battens.
Do not attach any thermal insulation strips to the side
panels of the surround unit.
To remove:
¡ Disconnect the appliance from the power supply.
¡ Undo the fastening screws.
¡ Lift the appliance slightly and pull it out completely.
Cable type
Neutral conductor (zero)
Phase conductor (external
conductor)
Installation instructions en
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hbf010ba0z

Table of Contents