Sony Ericsson T300 User Manual page 49

To select preferred mode
• Scroll to Connect/Data comm./Pref. service and select
GPRS and GSM or GSM only.
Note: To see the status of GPRS coverage and
connection, slide the volume key up or down
from standby to enter the Status menu and then
scroll to GPRS.
WAP profile settings
The WAP settings are stored in a WAP profile. In
most cases you only need to use one profile to access
the Internet.
You set up and use additional WAP profiles, for
example, when accessing secure Internet sites, such as
a banking site or a corporate intranet. You then simply
switch between profiles when you need to change the
network connection.
Tip: If there are no data account or WAP profile
settings in your phone, you can enter data account
settings when you enter WAP profile settings. See WAP
services/Options/WAP profiles/Add profile?/Enter a
name/ Connect using:/Add account?/.
This is the Internet version of the user's guide. © Print only for private use.
To enter WAP profile settings manually
1. Make sure you have a data account set up between
your phone and the Internet server, as described in
"Data account settings" on page 49.
2. Scroll to WAP services,
WAP profiles, .
YES
3. Select Add profile? to add a new profile or select an
existing profile that you want to edit,
When selecting Add profile? enter a name for the
profile, , Connect using:,
YES
account to be used,
YES
A list appears. Scroll to Save?,
When selecting an existing profile, you can do
the following:
• Rename – Change the name of the profile.
• Connect using – Select data account.
• IP address – WAP gateway server address.
• Advanced – More profile settings, see below.
• Delete – Remove the profile.
If you select Advanced you can also do the following:
• Chg homepage – Enter the address of the WAP site
you want as the homepage.
Setting up mobile Internet
, Options, ,
YES YES
.
YES
, select the data
YES
and enter the IP address:,
.
YES
.
YES
51