Table of Contents
Advertisement
To request settings from Sony Ericsson
1. Use a PC to go to http://www.SonyEricsson.com/.
Select your region and then use the Configurators to
request that a text message be sent to your phone with
the settings you need.
2. When the message arrives, New settings received.
Install? appears.
• Press
to install the new settings
YES
Note: If settings already exist in your phone you can
either keep or replace them. See "Advanced setting
information" on page 48 for more information.
• Press
to cancel installation. A new request for
NO
settings is then required, as in step 1.
3. After installation, see "Using mobile Internet" on
page 64.
Set up with the wizard
If your phone is not set up for WAP, you can ask your
network operator or service provider to provide you
with WAP settings information. Then you can simply
use the wizard in your phone to help guide you through
the relevant settings.
48
Setting up mobile Internet
This is the Internet version of the user's guide. © Print only for private use.
To use the wizard for setting up WAP
1. Scroll to WAP services,
Mobile Internet),
. The wizard now starts if no
YES
WAP settings exist.
2. Enter and save settings when asked, press
to confirm.
Advanced setting information
To use the WAP browser, via a WAP service provider,
you need settings for:
• a specific data account for WAP, and a WAP profile.
To use e-mail messaging, via an Internet service
provider, you need settings for:
• a specific data account for e-mail, and an
e-mail account.
To send a text message (SMS) to an e-mail address via
your network operator, you need to set:
• an e-mail gateway phone number.
Note: Some advanced settings that are described in the
following texts are not necessarily mandatory, please
consult your network operator or service provider for
more information.
, homepage (for example
YES
YES
Advertisement
Table of Contents
Troubleshooting
