Advertisement
Installation
Apply a thin bead of silicone between
the collar and the tiles.
Screw the cover onto the fixing nut.
14
Place the screws inside the fixing nut on
opposite sides
ZON-143-H-CP
ZON-143-CP
Cover orientation
Installation
Cover
With the correct cover orientation, use
the screws to locate the holes in the valve
body.
1
Rubber
washer
Fit the rubber washer, place the button onto the cap of the extension rod and screw the
rod onto the spindle of the cartridge.
x 2
Cover
Make sure the cover is level and tighten
the screws using the suitable hex key
provided with the ZON-128 to secure the
cover.
3
2
Button
Cap
15
Advertisement
