Honda NC750X 2018 Owner's Manual page 39

Gear position indicator
NC750X/XA
The gear position is shown in the gear position indicator.
"-" flashes when the ignition switch is turned to the ON position with the engine stop switch
u
(Stop) position.
"-" appears when the transmission is not shifted properly.
u
NC750XD
The gear position is shown in the gear position indicator when the D, S mode or MT MODE are
selected.
"-" appears for a few seconds and then goes off when the engine starts.
u
"-" flashes when the engine stop switch position is changed from
u
with the ignition switch in the ON position.
"-" flashes when the ignition switch is turned to the ON position with the engine stop switch
u
(Stop) position.
The indicator may flash if:
The front wheel leaves the ground.
u
You turn the wheel while the motorcycle is upright on the stand.
u
This is normal. To operate the system again, turn the ignition switch to the OFF position, then
to the ON position again.
If the "-" indicator is blinking in the gear position window while riding:
(Run) to (Stop) position
(P.133)
Continued
35