Table of Contents
Advertisement
You have to insert the SIM card and
charge the battery before you can use the
phone.
1. Insert the SIM card as shown. Slide
the silvery holder over the SIM card to
secure it.
2. Slide the battery into the cradle as
shown in the picture and press the
battery down flat.
3. Place the back cover as shown in the
picture and slide it into place.
4. Connect the charger to the phone at the
5-15 min.
flash symbol. The flash symbol on the
charger plug must face upwards.
5. It can take up to 5
icon is shown in the display.
6. Wait approximately four hours or until
you see the battery is fully charged.
4 h.
7. Remove the charger by tilting the plug
upwards.
15 minutes before an
–
Getting started
5
Advertisement
Table of Contents
