Behringer MIDAS DL16 Quick Start Manual page 6

10 MIDAS DL16
MIDAS DL16 Hook-up
Step 1: Hook-Up
On-stage slave DL16 in Standard mode
P16-D
Shielded CAT-5e
P16-M
FOH DL16 in Snake Master mode
Rear panel view
Front panel view
Sends to stage
DL16 as standalone snake
Active stage monitors
Active stage monitors
ADA8200
Out 1-8 Out 9-16 (via ADA8200)
(via DL16)
to mixer inputs
M32
IN 1-16
IN 17-32
Shielded CAT-5e
OUT 17-24
ADA8200
Note: The signals on both DL16 units (Out 1-8 and 9-16) and both ADA8200 units (Out 17-24 and 25-32)
are fully defi ned on the M32's 'Routing/AES50 Output' page. The second DL16's outputs must be set to
Out +8 on the unit itself.
Quick Start Guide
Linking two DL16 units
OUT 1-8
OUT 25-32
ADA8200
11
OUT 9-16