The service life and efficiency of the machine depend to a large extent on regular
lubrication. Mineral lubricants should be used for lubrication. Lubrication points must be
thoroughly cleaned before pressing in or applying grease.
Fig. 16 Lubrication points on the TOP cultivator.
NOTE! It is forbidden to work on a damaged machine caused by any event
resulting in a broken, or deformed frame, shaft or other assembly of the
machine!
4.7. Screw tightening torque
Bolts and nuts should be tightened in the machine with the correct torque depending on
the strength class of the bolt and its thread size and pitch. Their respective tightening
torque values are shown in Table 4.
24